Data Structures
class	AngleMeasureDialog
	Main window of the Angle Measure plug-in. More...

class	AngleMeasure
	Main class of the Angle Measure plug-in. More...

Detailed Description

The Angle Measure plugin is a small tool which is used to measure the angular distance between two points on the sky.

goes misty eyed* I recall measuring the size of the Cassini Division when I was a student. It was not the high academic glamor one might expect... It was cloudy... It was rainy... The observatory lab had some old scopes set up at one end, pointing at a photograph of Saturn at the other end of the lab. We measured. We calculated. We wished we were in Hawaii.

Note: Georg Zotti extended in 2014-09, enough to call it V4.0; Georg Zotti added properties in 2020-04, enough to call it V4.6

Modes

Equatorial Mode (original): mark start,end: distance/position angle in the sky, line rotates with sky, spherical angles influenced by refraction (numbers given on celestial sphere).

Horizontal Mode: mark start,end: distance/position angle in alt/azimuthal coordinates, line stays fixed in alt-az system. Angle may be different near to horizon because of refraction!

It is possible to link start and/or end to the sky. Distance/position angle still always in alt/azimuthal coordinates.

Data Structure Documentation

◆ AngleMeasureDialog

class AngleMeasureDialog

Public Slots
void	retranslate ()

Public Slots inherited from StelDialog
virtual void	retranslate ()=0
	Retranslate the content of the dialog. More...

virtual void	setVisible (bool)
	On the first call with "true" populates the window contents.

virtual void	close ()
	Closes the window (the window widget is not deleted, just not visible).

void	handleMovedTo (QPoint newPos)
	Adds dialog location to config.ini; should be connected in createDialogContent()

virtual void	handleDialogSizeChanged (QSizeF size)
	Stores dialog sizes into config.ini; should be connected from the proxy. More...

QString	getDialogName () const

Protected Member Functions
void	createDialogContent ()
	Initialize the dialog widgets and connect the signals/slots.

Protected Member Functions inherited from StelDialog
void	connectColorButton (QToolButton *button, QString propertyName, QString iniName, QString moduleName="")
	Prepare a QToolButton so that it can receive and handle askColor() connections properly. More...

bool	askConfirmation ()

Additional Inherited Members
Signals inherited from StelDialog
void	visibleChanged (bool)

Public Member Functions inherited from StelDialog
	StelDialog (QString dialogName="Default", QObject *parent=Q_NULLPTR)

virtual void	styleChanged ()
	Notify that the application style changed.

bool	visible () const
	Returns true if the dialog contents have been constructed and are currently shown.

Protected Slots inherited from StelDialog
void	askColor ()
	To be called by a connected QToolButton with a color background. More...

void	enableKineticScrolling (bool b)
	enable kinetic scrolling. This should be connected to StelApp's StelGui signal flagUseKineticScrollingChanged.

void	handleFontChanged ()
	connect from StelApp to handle font and font size changes.

Static Protected Member Functions inherited from StelDialog
static void	connectCheckBox (QAbstractButton *checkBox, const QString &actionName)
	Helper function to connect a checkbox to the StelAction with the specified name.

static void	connectCheckBox (QAbstractButton checkBox, StelAction action)
	Helper function to connect a checkbox to the given StelAction.

static void	connectIntProperty (QLineEdit *lineEdit, const QString &propName)
	Helper function to connect a QLineEdit to an integer StelProperty. More...

static void	connectIntProperty (QSpinBox *spinBox, const QString &propName)
	Helper function to connect a QSpinBox to an integer StelProperty. More...

static void	connectIntProperty (QComboBox *comboBox, const QString &propName)
	Helper function to connect a QComboBox to an integer StelProperty. More...

static void	connectIntProperty (QSlider *slider, const QString &propName, int minValue, int maxValue)
	Helper function to connect a QSlider to an double or float StelProperty. More...

static void	connectDoubleProperty (QDoubleSpinBox *spinBox, const QString &propName)
	Helper function to connect a QDoubleSpinBox to an double or float StelProperty. More...

static void	connectDoubleProperty (QSlider *slider, const QString &propName, double minValue, double maxValue)
	Helper function to connect a QSlider to an double or float StelProperty. More...

static void	connectStringProperty (QComboBox *comboBox, const QString &propName)
	Helper function to connect a QComboBox to an QString StelProperty. More...

static void	connectBoolProperty (QAbstractButton *checkBox, const QString &propName)
	Helper function to connect a checkbox to a bool StelProperty. More...

static void	connectBoolProperty (QGroupBox *checkBox, const QString &propName)
	Helper function to connect a groupbox to a bool StelProperty. More...

Protected Attributes inherited from StelDialog
QWidget *	dialog
	The main dialog.

class CustomProxy *	proxy

QString	dialogName
	The name should be set in derived classes' constructors and can be used to store and retrieve the panel locations.

QList< QWidget * >	kineticScrollingList
	A list of widgets where kinetic scrolling can be activated or deactivated The list must be filled once, in the constructor or init() of fillDialog() etc. More...

Properties inherited from StelDialog
bool	visible

◆ AngleMeasure

class AngleMeasure

Author: Matthew Gates; Alexander Wolf; Georg Zotti

Public Slots
bool	isEnabled () const

bool	isDmsFormat () const

bool	isEquatorial () const

bool	isHorizontal () const

bool	isEquatorialPADisplayed () const

bool	isHorizontalPADisplayed () const

bool	isHorizontalStartSkylinked () const

bool	isHorizontalEndSkylinked () const

Vec3f	getEquatorialTextColor () const

Vec3f	getEquatorialLineColor () const

Vec3f	getHorizontalTextColor () const

Vec3f	getHorizontalLineColor () const

void	enableAngleMeasure (bool b)

void	useDmsFormat (bool b)
	Use d/m/s instead of degree/minute/second symbols.

void	showEquatorialPA (bool b)

void	showHorizontalPA (bool b)

void	showEquatorial (bool b)

void	showHorizontal (bool b)

void	showHorizontalStartSkylinked (bool b)

void	showHorizontalEndSkylinked (bool b)

void	setEquatorialTextColor (Vec3f color)

void	setEquatorialLineColor (Vec3f color)

void	setHorizontalTextColor (Vec3f color)

void	setHorizontalLineColor (Vec3f color)

Signals
void	flagAngleMeasureChanged (bool b)

void	dmsFormatChanged (bool b)

void	flagShowEquatorialChanged (bool b)

void	flagShowHorizontalChanged (bool b)

void	flagShowEquatorialPAChanged (bool b)

void	flagShowHorizontalPAChanged (bool b)

void	flagShowHorizontalStartSkylinkedChanged (bool b)

void	flagShowHorizontalEndSkylinkedChanged (bool b)

void	equatorialTextColorChanged (Vec3f c)

void	equatorialLineColorChanged (Vec3f c)

void	horizontalTextColorChanged (Vec3f c)

void	horizontalLineColorChanged (Vec3f c)

Public Member Functions
virtual void	init ()
	Initialize itself. More...

virtual void	update (double deltaTime)
	Update the module with respect to the time. More...

virtual void	draw (StelCore *core)
	Execute all the drawing functions for this module. More...

virtual double	getCallOrder (StelModuleActionName actionName) const
	Return the value defining the order of call for the given action For example if stars.callOrder[ActionDraw] == 10 and constellation.callOrder[ActionDraw] == 11, the stars module will be drawn before the constellations. More...

virtual void	handleKeys (class QKeyEvent *event)
	Handle key events. More...

virtual void	handleMouseClicks (class QMouseEvent *event)
	Handle mouse clicks. More...

virtual bool	handleMouseMoves (int x, int y, Qt::MouseButtons b)
	Handle mouse moves. More...

virtual bool	configureGui (bool show=true)
	Detect or show the configuration GUI elements for the module. More...

void	restoreDefaultSettings ()
	Restore the plug-in's settings to the default state. More...

void	loadSettings ()
	Load the plug-in's settings from the configuration file. More...

Public Member Functions inherited from StelModule
virtual void	deinit ()
	Called before the module will be delete, and before the openGL context is suppressed. More...

virtual QSettings *	getSettings ()
	Return module-specific settings. More...

virtual QString	getModuleVersion () const
	Get the version of the module, default is stellarium main version.

virtual QString	getAuthorName () const
	Get the name of the module author.

virtual QString	getAuthorEmail () const
	Get the email adress of the module author.

virtual void	handleMouseWheel (class QWheelEvent *)
	Handle mouse wheel. More...

virtual bool	handlePinch (qreal scale, bool started)
	Handle pinch gesture events. More...

Properties
bool	enabled

bool	dmsFormat

bool	flagShowEquatorial

bool	flagShowHorizontal

bool	flagShowHorizontalStartSkylinked

bool	flagShowHorizontalEndSkylinked

bool	flagShowEquatorialPA

bool	flagShowHorizontalPA

Vec3f	equatorialTextColor

Vec3f	equatorialLineColor

Vec3f	horizontalTextColor

Vec3f	horizontalLineColor

Additional Inherited Members
Public Types inherited from StelModule
enum	StelModuleSelectAction { AddToSelection, ReplaceSelection, RemoveFromSelection }
	Enum used when selecting objects to define whether to add to, replace, or remove from the existing selection list. More...

enum	StelModuleActionName { ActionDraw, ActionUpdate, ActionHandleMouseClicks, ActionHandleMouseMoves, ActionHandleKeys }
	Define the possible action for which an order is defined. More...

Protected Member Functions inherited from StelModule
class StelAction *	addAction (const QString &id, const QString &groupId, const QString &text, QObject target, const char slot, const QString &shortcut="", const QString &altShortcut="")
	convenience methods to add an action (call to slot) to the StelActionMgr object. More...

class StelAction *	addAction (const QString &id, const QString &groupId, const QString &text, const char *slot, const QString &shortcut="", const QString &altShortcut="")
	convenience methods to add an action (call to own slot) to the StelActionMgr object. More...

StelAction *	addAction (const QString &id, const QString &groupId, const QString &text, QObject *contextObject, std::function< void()> lambda, const QString &shortcut="", const QString &altShortcut="")
	convenience methods to add an action (call to Lambda functor) to the StelActionMgr object. More...

Member Function Documentation

◆ configureGui()

virtual bool AngleMeasure::configureGui ( bool show = true )

virtual

This is to be used with plugins to display a configuration dialog from the plugin list window.

Parameters

show	if true, make the configuration GUI visible. If false, hide the config GUI if there is one.

Returns: true if the module has a configuration GUI, else false.

Reimplemented from StelModule.

◆ draw()

virtual void AngleMeasure::draw ( StelCore * core )

virtual

Parameters

core	the core to use for the drawing

Reimplemented from StelModule.

◆ getCallOrder()

virtual double AngleMeasure::getCallOrder ( StelModuleActionName actionName ) const

virtual

Parameters

actionName the name of the action for which we want the call order

Returns: the value defining the order. The closer to 0 the earlier the module's action will be called

Reimplemented from StelModule.

◆ handleKeys()

virtual void AngleMeasure::handleKeys ( class QKeyEvent * e )

virtual

Please note that most of the interactions will be done through the GUI module.

Parameters

e	the Key event

Returns: set the event as accepted if it was intercepted

Reimplemented from StelModule.

◆ handleMouseClicks()

virtual void AngleMeasure::handleMouseClicks ( class QMouseEvent * )

virtual

Please note that most of the interactions will be done through the GUI module.

Returns: set the event as accepted if it was intercepted

Reimplemented from StelModule.

◆ handleMouseMoves()

virtual bool AngleMeasure::handleMouseMoves	(	int	x,
		int	y,
		Qt::MouseButtons	b
	)

virtual

Please note that most of the interactions will be done through the GUI module.

Returns: true if the event was intercepted

Reimplemented from StelModule.

◆ init()

virtual void AngleMeasure::init ( )

virtual

If the initialization takes significant time, the progress should be displayed on the loading bar.

Implements StelModule.

◆ loadSettings()

void AngleMeasure::loadSettings ( )

Settings are kept in the "AngleMeasure" section in Stellarium's configuration file. If no such section exists, it will load default values.

See also: saveSettings(), restoreSettings()

◆ restoreDefaultSettings()

void AngleMeasure::restoreDefaultSettings ( )

Replace the plug-in's settings in Stellarium's configuration file with the default values and re-load them. Uses internally loadSettings() and saveSettings().

◆ update()

virtual void AngleMeasure::update ( double deltaTime )

virtual

Parameters

deltaTime the time increment in second since last call.

Implements StelModule.

Data Structures

Detailed Description

Data Structure Documentation

◆ AngleMeasureDialog

Public Slots

Protected Member Functions

Additional Inherited Members

◆ AngleMeasure

Public Slots

Signals

Public Member Functions

Properties

Additional Inherited Members

Member Function Documentation

◆ configureGui()

◆ draw()

◆ getCallOrder()

◆ handleKeys()

◆ handleMouseClicks()

◆ handleMouseMoves()

◆ init()

◆ loadSettings()

◆ restoreDefaultSettings()

◆ update()