 |
Stellarium
0.22.2
|
|
Stellarium
0.22.2
|
The Angle Measure plugin is a small tool which is used to measure the angular distance between two points on the sky. More...
Data Structures | |
| class | AngleMeasureDialog |
| Main window of the Angle Measure plug-in. More... | |
| class | AngleMeasure |
goes misty eyed* I recall measuring the size of the Cassini Division when I was a student. It was not the high academic glamor one might expect... It was cloudy... It was rainy... The observatory lab had some old scopes set up at one end, pointing at a photograph of Saturn at the other end of the lab. We measured. We calculated. We wished we were in Hawaii.
Modes
Equatorial Mode (original): mark start,end: distance/position angle in the sky, line rotates with sky, spherical angles influenced by refraction (numbers given on celestial sphere).
Horizontal Mode: mark start,end: distance/position angle in alt/azimuthal coordinates, line stays fixed in alt-az system. Angle may be different near to horizon because of refraction!
It is possible to link start and/or end to the sky. Distance/position angle still always in alt/azimuthal coordinates.
| class AngleMeasureDialog |
Public Slots | |
| void | retranslate () Q_DECL_OVERRIDE |
 Public Slots inherited from StelDialog | |
| virtual void | retranslate ()=0 |
| Retranslate the content of the dialog. More... | |
| virtual void | setVisible (bool) |
| On the first call with "true" populates the window contents. | |
| virtual void | close () |
| Closes the window (the window widget is not deleted, just not visible). | |
| void | handleMovedTo (QPoint newPos) |
| Adds dialog location to config.ini; should be connected in createDialogContent() | |
| virtual void | handleDialogSizeChanged (QSizeF size) |
| Stores dialog sizes into config.ini; should be connected from the proxy. More... | |
Protected Member Functions | |
| void | createDialogContent () Q_DECL_OVERRIDE |
| Initialize the dialog widgets and connect the signals/slots. | |
| Protected Member Functions inherited from StelDialog | |
| void | connectColorButton (QToolButton *button, QString propertyName, QString iniName, QString moduleName="") |
| Prepare a QToolButton so that it can receive and handle askColor() connections properly. More... | |
Additional Inherited Members | |
| Signals inherited from StelDialog | |
| void | visibleChanged (bool) |
| Public Member Functions inherited from StelDialog | |
| StelDialog (QString dialogName="Default", QObject *parent=Q_NULLPTR) | |
| virtual void | styleChanged () |
| Notify that the application style changed. | |
| bool | visible () const |
| Returns true if the dialog contents have been constructed and are currently shown. | |
| QString | getDialogName () const |
| Protected Slots inherited from StelDialog | |
| bool | askConfirmation () |
| void | askColor () |
| To be called by a connected QToolButton with a color background. More... | |
| void | enableKineticScrolling (bool b) |
| enable kinetic scrolling. This should be connected to StelApp's StelGui signal flagUseKineticScrollingChanged. | |
| void | handleFontChanged () |
| connect from StelApp to handle font and font size changes. | |
| virtual void | updateNightModeProperty (bool n) |
| Static Protected Member Functions inherited from StelDialog | |
| static void | connectCheckBox (QAbstractButton *checkBox, const QString &actionName) |
| Helper function to connect a checkbox to the StelAction with the specified name. | |
| static void | connectCheckBox (QAbstractButton *checkBox, StelAction *action) |
| Helper function to connect a checkbox to the given StelAction. | |
| static void | connectIntProperty (QLineEdit *lineEdit, const QString &propName) |
| Helper function to connect a QLineEdit to an integer StelProperty. More... | |
| static void | connectIntProperty (QSpinBox *spinBox, const QString &propName) |
| Helper function to connect a QSpinBox to an integer StelProperty. More... | |
| static void | connectIntProperty (QComboBox *comboBox, const QString &propName) |
| Helper function to connect a QComboBox to an integer StelProperty. More... | |
| static void | connectIntProperty (QSlider *slider, const QString &propName, int minValue, int maxValue) |
| Helper function to connect a QSlider to an double or float StelProperty. More... | |
| static void | connectDoubleProperty (QDoubleSpinBox *spinBox, const QString &propName) |
| Helper function to connect a QDoubleSpinBox to an double or float StelProperty. More... | |
| static void | connectDoubleProperty (AngleSpinBox *spinBox, const QString &propName) |
| Helper function to connect an AngleSpinBox to a double or float StelProperty representing decimal degrees. More... | |
| static void | connectDoubleProperty (QSlider *slider, const QString &propName, double minValue, double maxValue) |
| Helper function to connect a QSlider to an double or float StelProperty. More... | |
| static void | connectStringProperty (QComboBox *comboBox, const QString &propName) |
| Helper function to connect a QComboBox to a QString StelProperty. More... | |
| static void | connectStringProperty (QLineEdit *lineEdit, const QString &propName) |
| Helper function to connect a QLineEdit to a QString StelProperty. More... | |
| static void | connectBoolProperty (QAbstractButton *checkBox, const QString &propName) |
| Helper function to connect a checkbox to a bool StelProperty. More... | |
| static void | connectBoolProperty (QGroupBox *checkBox, const QString &propName) |
| Helper function to connect a groupbox to a bool StelProperty. More... | |
| Protected Attributes inherited from StelDialog | |
| QWidget * | dialog |
| The main dialog. | |
| class CustomProxy * | proxy |
| QString | dialogName |
| The name should be set in derived classes' constructors and can be used to store and retrieve the panel locations. | |
| QList< QWidget * > | kineticScrollingList |
| A list of widgets where kinetic scrolling can be activated or deactivated The list must be filled once, in the constructor or init() of fillDialog() etc. More... | |
| Properties inherited from StelDialog | |
| bool | visible |
| class AngleMeasure |
Main class of the Angle Measure plug-in.
Public Slots | |
| bool | isEnabled () const |
| bool | isFollowCursor () const |
| bool | isDmsFormat () const |
| bool | isEquatorial () const |
| bool | isHorizontal () const |
| bool | isEquatorialPADisplayed () const |
| bool | isHorizontalPADisplayed () const |
| bool | isHorizontalStartSkylinked () const |
| bool | isHorizontalEndSkylinked () const |
| Vec3f | getEquatorialTextColor () const |
| Vec3f | getEquatorialLineColor () const |
| Vec3f | getHorizontalTextColor () const |
| Vec3f | getHorizontalLineColor () const |
| void | enableAngleMeasure (bool b) |
| void | followCursor (bool b) |
| void | useDmsFormat (bool b) |
| Use d/m/s instead of degree/minute/second symbols. | |
| void | showEquatorialPA (bool b) |
| void | showHorizontalPA (bool b) |
| void | showEquatorial (bool b) |
| void | showHorizontal (bool b) |
| void | showHorizontalStartSkylinked (bool b) |
| void | showHorizontalEndSkylinked (bool b) |
| void | setEquatorialTextColor (Vec3f color) |
| void | setEquatorialLineColor (Vec3f color) |
| void | setHorizontalTextColor (Vec3f color) |
| void | setHorizontalLineColor (Vec3f color) |
Signals | |
| void | flagAngleMeasureChanged (bool b) |
| void | flagFollowCursorChanged (bool b) |
| void | dmsFormatChanged (bool b) |
| void | flagShowEquatorialChanged (bool b) |
| void | flagShowHorizontalChanged (bool b) |
| void | flagShowEquatorialPAChanged (bool b) |
| void | flagShowHorizontalPAChanged (bool b) |
| void | flagShowHorizontalStartSkylinkedChanged (bool b) |
| void | flagShowHorizontalEndSkylinkedChanged (bool b) |
| void | equatorialTextColorChanged (Vec3f c) |
| void | equatorialLineColorChanged (Vec3f c) |
| void | horizontalTextColorChanged (Vec3f c) |
| void | horizontalLineColorChanged (Vec3f c) |
Public Member Functions | |
| virtual void | init () Q_DECL_OVERRIDE |
| Initialize itself. More... | |
| virtual void | update (double deltaTime) Q_DECL_OVERRIDE |
| Update the module with respect to the time. More... | |
| virtual void | draw (StelCore *core) Q_DECL_OVERRIDE |
| Execute all the drawing functions for this module. More... | |
| virtual double | getCallOrder (StelModuleActionName actionName) const Q_DECL_OVERRIDE |
| Return the value defining the order of call for the given action For example if stars.callOrder[ActionDraw] == 10 and constellation.callOrder[ActionDraw] == 11, the stars module will be drawn before the constellations. More... | |
| virtual void | handleKeys (class QKeyEvent *event) Q_DECL_OVERRIDE |
| Handle key events. More... | |
| virtual void | handleMouseClicks (class QMouseEvent *event) Q_DECL_OVERRIDE |
| Handle mouse clicks. More... | |
| virtual bool | handleMouseMoves (int x, int y, Qt::MouseButtons b) Q_DECL_OVERRIDE |
| Handle mouse moves. More... | |
| virtual bool | configureGui (bool show=true) Q_DECL_OVERRIDE |
| Detect or show the configuration GUI elements for the module. More... | |
| void | restoreDefaultSettings () |
| Restore the plug-in's settings to the default state. More... | |
| void | loadSettings () |
| Load the plug-in's settings from the configuration file. More... | |
| Public Member Functions inherited from StelModule | |
| StelModule () | |
| Constructor. Every derived class MUST call setObjectName(className) in its constructor. | |
| virtual void | deinit () |
| Called before the module will be deleted, and before the OpenGL context is suppressed. More... | |
| virtual QSettings * | getSettings () |
| Return module-specific settings. More... | |
| virtual QString | getModuleVersion () const |
| Get the version of the module, default is stellarium main version. | |
| virtual QString | getAuthorName () const |
| Get the name of the module author. | |
| virtual QString | getAuthorEmail () const |
| Get the email adress of the module author. | |
| virtual void | handleMouseWheel (class QWheelEvent *) |
| Handle mouse wheel. More... | |
| virtual bool | handlePinch (qreal scale, bool started) |
| Handle pinch gesture events. More... | |
Properties | |
| bool | enabled |
| bool | flagFollowCursor |
| measurement data block follows cursor rather than start of measurement line | |
| bool | dmsFormat |
| bool | flagShowEquatorial |
| bool | flagShowHorizontal |
| bool | flagShowHorizontalStartSkylinked |
| bool | flagShowHorizontalEndSkylinked |
| bool | flagShowEquatorialPA |
| bool | flagShowHorizontalPA |
| Vec3f | equatorialTextColor |
| Vec3f | equatorialLineColor |
| Vec3f | horizontalTextColor |
| Vec3f | horizontalLineColor |
Additional Inherited Members | |
| Public Types inherited from StelModule | |
| enum | StelModuleSelectAction { AddToSelection, ReplaceSelection, RemoveFromSelection } |
| Enum used when selecting objects to define whether to add to, replace, or remove from the existing selection list. More... | |
| enum | StelModuleActionName { ActionDraw, ActionUpdate, ActionHandleMouseClicks, ActionHandleMouseMoves, ActionHandleKeys } |
| Define the possible action for which an order is defined. More... | |
| Protected Member Functions inherited from StelModule | |
| class StelAction * | addAction (const QString &id, const QString &groupId, const QString &text, QObject *target, const char *slot, const QString &shortcut="", const QString &altShortcut="") |
| convenience methods to add an action (call to slot) to the StelActionMgr object. More... | |
| class StelAction * | addAction (const QString &id, const QString &groupId, const QString &text, const char *slot, const QString &shortcut="", const QString &altShortcut="") |
| convenience methods to add an action (call to own slot) to the StelActionMgr object. More... | |
| StelAction * | addAction (const QString &id, const QString &groupId, const QString &text, QObject *contextObject, std::function< void()> lambda, const QString &shortcut="", const QString &altShortcut="") |
| convenience methods to add an action (call to Lambda functor) to the StelActionMgr object. More... | |
|
virtual |
This is to be used with plugins to display a configuration dialog from the plugin list window.
| show | if true, make the configuration GUI visible. If false, hide the config GUI if there is one. |
Reimplemented from StelModule.
|
virtual |
| core | the core to use for the drawing |
Reimplemented from StelModule.
|
virtual |
| actionName | the name of the action for which we want the call order |
Reimplemented from StelModule.
|
virtual |
Please note that most of the interactions will be done through the GUI module.
| e | the Key event |
Reimplemented from StelModule.
|
virtual |
Please note that most of the interactions will be done through the GUI module.
Reimplemented from StelModule.
|
virtual |
Please note that most of the interactions will be done through the GUI module.
Reimplemented from StelModule.
|
virtual |
If the initialization takes significant time, the progress should be displayed on the loading bar.
Implements StelModule.
| void AngleMeasure::loadSettings | ( | ) |
Settings are kept in the "AngleMeasure" section in Stellarium's configuration file. If no such section exists, it will load default values.
| void AngleMeasure::restoreDefaultSettings | ( | ) |
Replace the plug-in's settings in Stellarium's configuration file with the default values and re-load them. Uses internally loadSettings() and saveSettings().
|
virtual |
| deltaTime | the time increment in second since last call. |
Reimplemented from StelModule.
1.8.17