Provide script API for Stellarium global functions. More...

#include <StelMainScriptAPI.hpp>

Public Slots
static void	setJDay (double JD)
	Set the current date as Julian Day number. More...

static double	getJDay ()
	Get the current date as Julian Day number. More...

static void	setMJDay (double MJD)
	Set the current date as Modified Julian Day. More...

static double	getMJDay ()
	Get the current date as Modified Julian Day. More...

static void	setDate (const QString &dateStr, const QString &spec="utc", const bool &dateIsDT=false)
	Sets Stellarium's date using an absolute or relative value. More...

static QString	getDate (const QString &spec="utc")
	get the simulation date and time as a string in ISO format, e.g. More...

static QString	getDeltaT ()
	get the DeltaT for the simulation date and time as a string in HMS format, e.g. More...

static double	getDeltaTsec ()
	get the DeltaT for the simulation date and time as a double in seconds More...

static QString	getDeltaTAlgorithm ()
	get the DeltaT equation name for the simulation date and time as a string More...

static void	setDeltaTAlgorithm (QString algorithmName)
	set equation of the DeltaT for the simulation date and time More...

static void	setTimeRate (double ts)
	Set time speed in JDay/sec. More...

static double	getTimeRate ()
	Get simulation time rate. More...

static bool	isRealTime ()
	Get the simulation time and rate state - is it "real time". More...

static void	setRealTime ()
	Set the simulation time to the current system time, and the time rate to 1.

static bool	isPlanetocentricCalculations ()
	Get the type of calculations in the simulation - is it "planetocentric calculations" or not. More...

static void	setPlanetocentricCalculations (bool f)
	Set the flag for use planetocentric calculations.

static void	selectObjectByName (const QString &name, bool pointer=false)
	Select an object by name. More...

static void	selectConstellationByName (const QString &name)
	Select a constellation by name. More...

static QVariantMap	getObjectInfo (const QString &name)
	Fetch a map with data about an object's position, magnitude and so on. More...

static QVariantMap	getSelectedObjectInfo ()
	Fetch a map with data about the latest selected object's position, magnitude and so on. More...

static void	addToSelectedObjectInfoString (const QString &str, bool replace=false)
	Add some arbitrary string to the object information of the currently selected object. More...

static void	setStelProperty (const QString &propertyName, QVariant propertyValue)
	Set value for some StelProperty. More...

static QVariant	getStelProperty (const QString &propertyName)
	Get value for some StelProperty. More...

static void	clear (const QString &state="natural")
	Clear the display options, setting a "standard" view. More...

static double	getViewAltitudeAngle ()
	Get the current viewing direction altitude angle at center of view. More...

static double	getViewAzimuthAngle ()
	Get the current viewing direction azimuth angle at center of view. More...

static double	getViewRaAngle ()
	Get the current viewing direction Right Ascension at center of view. More...

static double	getViewDecAngle ()
	Get the current viewing direction Declination angle at center of view. More...

static double	getViewRaJ2000Angle ()
	Get the current viewing direction Right Ascension in J2000 frame at center of view. More...

static double	getViewDecJ2000Angle ()
	Get the current viewing direction Declination angle in J2000 frame at center of view. More...

static void	moveToObject (const QString &name, float duration=1.)
	Move the current viewing direction to some object. More...

static void	moveToSelectedObject (float duration=1.)
	Move the current viewing direction to selected object. More...

static void	moveToAltAzi (const QString &alt, const QString &azi, float duration=1.)
	move the current viewing direction to some specified altitude and azimuth. More...

static void	moveToRaDec (const QString &ra, const QString &dec, float duration=1.)
	move the current viewing direction to some specified right ascension and declination. More...

static void	moveToRaDecJ2000 (const QString &ra, const QString &dec, float duration=1.)
	move the current viewing direction to some specified right ascension and declination in the J2000 frame angles may be specified in a format recognised by StelUtils::getDecAngle() More...

static void	moveToGalLongLat (const QString &lon, const QString &lat, float duration)
	move the current viewing direction to some specified galactic coordinates angles may be specified in a format recognised by StelUtils::getDecAngle() More...

static void	setObserverLocation (double longitude, double latitude, double altitude, double duration=1., const QString &name="", const QString &planet="")
	Set the observer location. More...

static void	setObserverLocation (const QString &id, double duration=1.)
	Set the location by the name of the location. More...

static QString	getObserverLocation ()
	Get the ID of the current observer location.

static QVariantMap	getObserverLocationInfo ()
	Get the info of the current observer location. More...

static void	setTimezone (QString tz, int markAsCustom=-1)
	set timezone name. More...

static QStringList	getAllTimezoneNames ()
	Return an array of all timezone names valid for setTimezone(tzName)

static void	screenshot (const QString &prefix, bool invert=false, const QString &dir="", const bool overwrite=false, const QString &format="")
	Save a screenshot. More...

static void	setGuiVisible (bool b)
	Show or hide the GUI (toolbars). More...

static void	setMinFps (float m)
	Set the minimum frames per second. More...

static float	getMinFps ()
	Get the current minimum frames per second. More...

static void	setMaxFps (float m)
	Set the maximum frames per second. More...

static float	getMaxFps ()
	Get the current maximum frames per second. More...

static QString	getMountMode ()
	Get the mount mode as a string. More...

static void	setMountMode (const QString &mode)
	Set the mount mode. More...

static bool	getNightMode ()
	Get the current status of Night Mode. More...

static void	setNightMode (bool b)
	Set the status of Night Mode. More...

static QString	getProjectionMode ()
	Get the current projection mode ID string. More...

void	setProjectionMode (const QString &id)
	Set the current projection mode. More...

static bool	getDiskViewport ()
	Get the status of the disk viewport. More...

void	setDiskViewport (bool b)
	Set the disk viewport. More...

static void	setSphericMirror (bool b)
	Set the viewport distortion effect. More...

static void	setViewportStretch (const float stretch)
	Set a lateral width distortion. More...

static QStringList	getAllSkyCultureIDs ()
	Get a list of Sky Culture IDs. More...

static QString	getSkyCulture ()
	Find out the current sky culture. More...

void	setSkyCulture (const QString &id)
	Set the current sky culture. More...

static QString	getSkyCultureName ()
	Find out the current sky culture and get it English name. More...

static QString	getSkyCultureNameI18n ()
	Find out the current sky culture and get it localized name. More...

static bool	getFlagGravityLabels ()
	Get the current status of the gravity labels option. More...

static bool	getFlipHorz ()
	Get the current status of the horizontal flip. More...

static void	setFlipHorz (bool b)
	Set the horizontal flip status. More...

static bool	getFlipVert ()
	Get the current status of the vertical flip. More...

static void	setFlipVert (bool b)
	Set the vertical flip status. More...

static void	setFlagGravityLabels (bool b)
	Turn on/off gravity labels. More...

void	loadSkyImage (const QString &id, const QString &filename, double lon0, double lat0, double lon1, double lat1, double lon2, double lat2, double lon3, double lat3, double minRes=2.5, double maxBright=14, bool visible=true, const QString &frame="EqJ2000", bool withAberration=true)
	Load an image into the sky background at the given sky coordinates and be warped with the sky. More...

void	loadSkyImage (const QString &id, const QString &filename, const QString &lon0, const QString &lat0, const QString &lon1, const QString &lat1, const QString &lon2, const QString &lat2, const QString &lon3, const QString &lat3, double minRes=2.5, double maxBright=14, bool visible=true, const QString &frame="EqJ2000", bool withAberration=true)
	Convenience function which allows the user to provide longitudinal and latitudinal angles (RA/Dec or Long/Lat or Az/Alt) as strings (e.g. More...

void	loadSkyImage (const QString &id, const QString &filename, double lon, double lat, double angSize, double rotation, double minRes=2.5, double maxBright=14, bool visible=true, const QString &frame="EqJ2000", bool withAberration=true)
	Convenience function which allows loading of a (square) sky image based on a central coordinate, angular size and rotation. More...

void	loadSkyImage (const QString &id, const QString &filename, const QString &lon, const QString &lat, double angSize, double rotation, double minRes=2.5, double maxBright=14, bool visible=true, const QString &frame="EqJ2000", bool withAberration=true)
	Convenience function which allows loading of a (square) sky image based on a central coordinate, angular size and rotation. More...

void	removeSkyImage (const QString &id)
	Remove a SkyImage. More...

static QVariantMap	getScreenXYFromAltAzi (const QString &alt, const QString &azi)
	Get screen coordinates from some specified altitude and azimuth angles may be specified in a format recognised by StelUtils::getDecAngle() More...

void	loadSound (const QString &filename, const QString &id)
	Load a sound from a file. More...

void	playSound (const QString &id)
	Play a sound which has previously been loaded with loadSound. More...

void	pauseSound (const QString &id)
	Pause a sound which is playing. More...

void	stopSound (const QString &id)
	Stop a sound from playing. More...

void	dropSound (const QString &id)
	Drop a sound from memory. More...

static qint64	getSoundPosition (const QString &id)
	Get position in a playing sound. More...

static qint64	getSoundDuration (const QString &id)
	Get duration of a sound object (if possible). More...

void	loadVideo (const QString &filename, const QString &id, float x, float y, bool show=true, float alpha=1.0f)
	Load a video from a file. More...

void	playVideo (const QString &id, bool keepVisibleAtEnd=false)
	Play a video which has previously been loaded with loadVideo. More...

void	playVideoPopout (const QString &id, float fromX, float fromY, float atCenterX, float atCenterY, float finalSizeX, float finalSizeY, float popupDuration, bool frozenInTransition)
	Play a video which has previously been loaded with loadVideo with a complex effect. More...

void	pauseVideo (const QString &id)
	Pause a video which is playing. More...

void	stopVideo (const QString &id)
	Stop a video from playing. More...

void	dropVideo (const QString &id)
	Drop a video from memory. More...

void	seekVideo (const QString &id, qint64 ms, bool pause=false)
	Seeks a video to the requested time and either start playing or freeze there. More...

void	setVideoXY (const QString &id, float x, float y, bool relative=false)
	Sets the position of the video widget. More...

void	setVideoAlpha (const QString &id, float alpha)
	Set the alpha value of a video when visible. More...

void	resizeVideo (const QString &id, float w, float h)
	Resize the video widget to the specified width, height. More...

void	showVideo (const QString &id, bool show=true)
	Set the visibility state of a video. More...

static qint64	getVideoDuration (const QString &id)
	Get the duration of a loaded video, or -1. More...

static qint64	getVideoPosition (const QString &id)
	Get the current position of a loaded video, or -1. More...

static int	getScreenWidth ()
	Get the screen width in pixels. More...

static int	getScreenHeight ()
	Get the screen height (actually, height of Stellarium main view) in pixels. More...

static double	getScriptRate ()
	Get the script execution rate as a multiple of normal execution speed. More...

static void	setScriptRate (double r)
	Set the script execution rate as a multiple of normal execution speed. More...

static void	pauseScript ()
	Pause the currently running script. More...

static void	setSelectedObjectInfo (const QString &level)
	Set the amount of selected object information to display. More...

void	exit ()
	Stop the script.

void	quitStellarium ()
	Close Stellarium.

static QStringList	getPropertyList ()
	Return a QStringlist of all available properties. Useful for script development...

static void	debug (const QString &s)
	print a debugging message to the console More...

static void	output (const QString &s)
	print an output message from script More...

static QString	mapToString (const QVariantMap &map)
	print contents of a QVariantMap as []-delimited list of [ "key" = ] lists. More...

static void	resetOutput (void)
	Reset (clear) output file.

static void	saveOutputAs (const QString &filename)
	Save output file to new file (in same directory as output.txt). More...

static QString	getAppLanguage ()
	Get the current application language. More...

static void	setAppLanguage (QString langCode)
	Set the current application language. More...

static QString	getSkyLanguage ()
	Get the current sky language. More...

static void	setSkyLanguage (QString langCode)
	Set the current sky language. More...

static QString	translate (QString englishText)
	Translate the string.

void	goHome ()
	Go to defaults position and direction of view.

static int	getBortleScaleIndex ()
	Returns the currently set Bortle scale index, which is used to simulate light pollution. More...

static void	setBortleScaleIndex (int index)
	Changes the Bortle scale index, which is used to simulate light pollution. More...

static double	refraction (double altitude, bool apparent=false)
	Apply refraction with current atmospheric parameters to altitude. More...

static double	jdFromDateString (const QString &dt, const QString &spec)
	For use in setDate and waitFor For parameter descriptions see setDate(). More...

void	wait (double t)
	Pauses the script for t seconds. More...

void	waitFor (const QString &dt, const QString &spec="utc")
	Waits until a specified simulation date/time. More...

static QString	getEnv (const QString &var)
	Retrieve value of environment variable. More...

static bool	isModuleLoaded (const QString &moduleID)
	return whether a particular module has been loaded. More...

static QString	getPlatformName (void)

static bool	isMediaPlaybackSupported (void)
	Get the current status of media playback support. More...

static void	setDisplayMaxLuminance (double cdPerSqM)
	Experimental. More...

static double	getDisplayMaxLuminance ()
	Experimental. More...

static void	setDisplayAdaptationLuminance (double cdPerSqM)
	Experimental. More...

static double	getDisplayAdaptationLuminance ()
	Experimental. More...

static void	setDisplayGamma (double gamma)
	Experimental: Set the display gamma. More...

static double	getDisplayGamma ()
	Experimental: Get the display gamma. More...

Signals
void	requestLoadSkyImage (const QString &id, const QString &filename, double lon0, double lat0, double lon1, double lat1, double lon2, double lat2, double lon3, double lat3, double minRes, double maxBright, bool visible, const StelCore::FrameType frameType, bool withAberration)

void	requestRemoveSkyImage (const QString &id)

void	requestLoadSound (const QString &filename, const QString &id)

void	requestPlaySound (const QString &id)

void	requestPauseSound (const QString &id)

void	requestStopSound (const QString &id)

void	requestDropSound (const QString &id)

void	requestLoadVideo (const QString &filename, const QString &id, float x, float y, bool show, float alpha)

void	requestPlayVideo (const QString &id, const bool keepVisibleAtEnd)

void	requestPlayVideoPopout (const QString &id, float fromX, float fromY, float atCenterX, float atCenterY, float finalSizeX, float finalSizeY, float popupDuration, bool frozenInTransition)

void	requestPauseVideo (const QString &id)

void	requestStopVideo (const QString &id)

void	requestDropVideo (const QString &id)

void	requestSeekVideo (const QString &id, qint64 ms, bool pause=false)

void	requestSetVideoXY (const QString &id, float x, float y, bool relative=false)

void	requestSetVideoAlpha (const QString &id, float alpha)

void	requestResizeVideo (const QString &id, float w, float h)

void	requestShowVideo (const QString &id, bool show)

void	requestSetProjectionMode (QString id)

void	requestSetSkyCulture (QString id)

void	requestSetDiskViewport (bool b)

void	requestExit ()

void	requestSetHomePosition ()

Public Member Functions
	StelMainScriptAPI (QObject *parent=Q_NULLPTR)

Properties
double	JDay

double	timeSpeed

Detailed Description

Public slots in this class may be used in Stellarium scripts, and are accessed as member function to the "core" scripting object. Module-specific functions, such as setting and clearing of display flags (e.g. LandscapeMgr::setFlagAtmosphere) can be accessed directly via the scripting object with the class name, e.g. by using the scripting command: LandscapeMgr.setFlagAtmosphere(true);

Member Function Documentation

◆ addToSelectedObjectInfoString

static void StelMainScriptAPI::addToSelectedObjectInfoString	(	const QString &	str,
		bool	replace = `false`
	)

staticslot

if

replace==true, replace this extra string, if false, add to it. Note that while most objects keep this information after unselection and reselection, stars will start with no extra information when they become selected again.

◆ clear

static void StelMainScriptAPI::clear ( const QString & state = "natural" )

staticslot

Preset states:

natural : azimuthal mount, atmosphere, landscape, no lines, labels or markers
starchart : equatorial mount, constellation lines, no landscape, atmosphere etc. labels & markers on.
deepspace : like starchart, but no planets, no eq.grid, no markers, no lines.
galactic : like deepspace, but in galactic coordinate system.
supergalactic : like deepspace, but in supergalactic coordinate system.
Parameters

state the name of a preset state.

◆ debug

static void StelMainScriptAPI::debug ( const QString & s )

staticslot

Parameters

s	the message to be displayed on the console.

◆ dropSound

void StelMainScriptAPI::dropSound ( const QString & id )

slot

You should do this before the end of your script.

Parameters

id	the identifier used when loadSound was called

◆ dropVideo

void StelMainScriptAPI::dropVideo ( const QString & id )

slot

You should do this before the end of your script.

Parameters

id	the identifier used when loadVideo() was called

◆ getAllSkyCultureIDs

static QStringList StelMainScriptAPI::getAllSkyCultureIDs ( )

staticslot

Returns: a list of valid sky culture IDs

◆ getAppLanguage

static QString StelMainScriptAPI::getAppLanguage ( )

staticslot

Returns: two letter language code, e.g. "en", or "de" and so on.

◆ getBortleScaleIndex

static int StelMainScriptAPI::getBortleScaleIndex ( )

staticslot

Wrapper for StelSkyDrawer::getBortleScaleIndex

See also: https://en.wikipedia.org/wiki/Bortle_scale

Returns: the Bortle scale index in range [1,9]

◆ getDate

static QString StelMainScriptAPI::getDate ( const QString & spec = "utc" )

staticslot

"2008-03-24T13:21:01"

Parameters

spec	if "utc", the returned string's timezone is UTC, else it is local time.

Returns: the current simulation time.

◆ getDeltaT

static QString StelMainScriptAPI::getDeltaT ( )

staticslot

"0h1m68.2s"

Returns: the DeltaT for current simulation time.

◆ getDeltaTAlgorithm

static QString StelMainScriptAPI::getDeltaTAlgorithm ( )

staticslot

Returns: name of the DeltaT equation

◆ getDeltaTsec

static double StelMainScriptAPI::getDeltaTsec ( )

staticslot

Returns: the DeltaT for current simulation time.

◆ getDiskViewport

static bool StelMainScriptAPI::getDiskViewport ( )

staticslot

Returns: true if the disk view port is currently enabled

◆ getDisplayAdaptationLuminance

static double StelMainScriptAPI::getDisplayAdaptationLuminance ( )

staticslot

Returns: configured physical display adaptation luminance for tonemapping. The standard value is 50cd/m^2, appropriate for CRTs in dimly lit office environments.

Note: This is experimental and may not be available in later versions.

◆ getDisplayGamma

static double StelMainScriptAPI::getDisplayGamma ( )

staticslot

Initial default value is 2.2222 (for a CRT), and sRGB LCD (and similar modern) panels try to reproduce that. Higher gamma makes the sky brighter.

Note: This is experimental and may not be available in later versions.

◆ getDisplayMaxLuminance

static double StelMainScriptAPI::getDisplayMaxLuminance ( )

staticslot

Returns: configured physical display luminance for tonemapping. The standard value is 100cd/m^2, appropriate for CRTs. More modern screens often have more.

Note: This is experimental and may not be available in later versions.

◆ getEnv

static QString StelMainScriptAPI::getEnv ( const QString & var )

staticslot

Parameters

name. On desktop Windows and Qt before 5.10, this call may result in data loss if the original string contains Unicode characters not representable in the ANSI encoding.

◆ getFlagGravityLabels

static bool StelMainScriptAPI::getFlagGravityLabels ( )

staticslot

Returns: true if gravity labels are enabled, else false

◆ getFlipHorz

static bool StelMainScriptAPI::getFlipHorz ( )

staticslot

Returns: true if horizontal flip are enabled, else false

◆ getFlipVert

static bool StelMainScriptAPI::getFlipVert ( )

staticslot

Returns: true if vertical flip are enabled, else false

◆ getJDay

static double StelMainScriptAPI::getJDay ( )

staticslot

Returns: the Julian Day number

◆ getMaxFps

static float StelMainScriptAPI::getMaxFps ( )

staticslot

Returns: The current maximum frames per second setting.

◆ getMinFps

static float StelMainScriptAPI::getMinFps ( )

staticslot

Returns: The current minimum frames per second setting.

◆ getMJDay

static double StelMainScriptAPI::getMJDay ( )

staticslot

Returns: the Modified Julian Day

◆ getMountMode

static QString StelMainScriptAPI::getMountMode ( )

staticslot

Returns: "equatorial" or "azimuthal"

◆ getNightMode

static bool StelMainScriptAPI::getNightMode ( )

staticslot

Returns: true if night mode is currently set

◆ getObjectInfo

static QVariantMap StelMainScriptAPI::getObjectInfo ( const QString & name )

staticslot

Parameters

name	is the English name of the object for which data will be returned.

Returns

a map of object data. Keys:

above-horizon : true, if celestial body is above horizon
altitude : apparent altitude angle in decimal degrees
azimuth : apparent azimuth angle in decimal degrees
altitude-geometric : geometric altitude angle in decimal degrees
azimuth-geometric : geometric azimuth angle in decimal degrees
ra : right ascension angle (current date frame) in decimal degrees
dec : declination angle (current date frame) in decimal degrees
raJ2000 : right ascension angle (J2000 frame) in decimal degrees
decJ2000 : declination angle (J2000 frame) in decimal degrees
parallacticAngle : parallactic angle in decimal degrees (for non-star objects only)
hourAngle-dd : hour angle in decimal degrees
hourAngle-hms : hour angle in HMS format (formatted string)
iauConstellation : 3-letter abbreviation of IAU constellation (string)
meanSidTm : mean sidereal time, in decimal degrees (on Earth only!)
appSidTm : mean sidereal time, in decimal degrees (on Earth only!)
glong : galactic longitude in decimal degrees
glat : galactic latitude in decimal degrees
sglong : supergalactic longitude in decimal degrees
sglat : supergalactic latitude in decimal degrees
elong : ecliptic longitude in decimal degrees (on Earth only!)
elat : ecliptic latitude in decimal degrees (on Earth only!)
elongJ2000 : ecliptic longitude (Earth's J2000 frame) in decimal degrees
elatJ2000 : ecliptic latitude (Earth's J2000 frame) in decimal degrees
vmag : visual magnitude
vmage : visual magnitude (extincted)
size: angular size in radians
size-dd : angular size in decimal degrees
size-deg : angular size in decimal degrees (formatted string)
size-dms : angular size in DMS format
localized-name : localized name
The returned map can contain other information. For example, Solar System objects add:
distance : distance to object in AU (for Solar system objects only!)
phase : phase (illuminated fraction, 0..1) of object (for Solar system objects only!)
illumination : phase of object in percent (0..100) (for Solar system objects only!)
phase-angle : phase angle of object in radians (for Solar system objects only!)
phase-angle-dms : phase angle of object in DMS (for Solar system objects only!)
phase-angle-deg : phase angle of object in decimal degrees (for Solar system objects only!)
elongation : elongation of object in radians (for Solar system objects only!)
elongation-dms : elongation of object in DMS (for Solar system objects only!)
elongation-deg : elongation of object in decimal degrees (for Solar system objects only!)
ecl-elongation : elongation (difference in ecliptical longitude) of object in radians (for Solar system objects and from Earth only!)
ecl-elongation-dms : elongation (difference in ecliptical longitude) of object in DMS (for Solar system objects and from Earth only!)
ecl-elongation-deg : elongation (difference in ecliptical longitude) of object in decimal degrees (for Solar system objects and from Earth only!)
velocity: the planet velocity around the parent planet in ecliptical coordinates in AU/d (for Solar system objects only!)
velocity-kms: the planet velocity around the parent planet in km/s (for Solar system objects only!)
heliocentric-velocity: the planet's heliocentric velocity in the solar system in ecliptical coordinates in AU/d (for Solar system objects only!)
heliocentric-velocity-kms: the planet heliocentric velocity in the solar system in km/s (for Solar system objects only!)
scale: scale factor for Solar system bodies (for Solar system objects only!)
eclipse-obscuration: value of obscuration for solar eclipse (for Sun only!)
eclipse-magnitude: value of magnitude for solar eclipse (for Sun only!) Other StelObject derivates, also those defined in plugins, may add more, these fields are documented in the respective classes, or simply try what you get: You can print a complete set of entries into output with the following commands:
map=core.getSelectedObjectInfo();

core.output(core.mapToString(map));

◆ getObserverLocationInfo

static QVariantMap StelMainScriptAPI::getObserverLocationInfo ( )

staticslot

Returns

a map of object data. Keys:

altitude : altitude in meters
longitude : longitude in decimal degrees
latitude : latitude in decimal degrees
planet : name of planet
location : city and region
sidereal-year : duration of the sidereal year on the planet in Earth's days (since 0.12.0)
sidereal-day : duration of the sidereal day on the planet in Earth's hours (since 0.12.0)
solar-day : duration of the mean solar day on the planet in Earth's hours (since 0.12.0)
local-sidereal-time : local sidereal time on the planet in hours (since 0.13.3)
local-sidereal-time-hms : local sidereal time on the planet in hours in HMS format (since 0.13.3)
timezone : IANA timezone or "LMST" (Local Mean Solar Time) or "LTST" (Local True Solar Time) (since 0.18.3)
location-timezone : IANA timezone of current location (as stored in location database) (since 0.18.3)

◆ getPlatformName

static QString StelMainScriptAPI::getPlatformName ( void )

staticslot

Returns

The name of platform where running Stellarium. Keys:

FreeBSD
OpenBSD
NetBSD
Linux
Windows
macOS
Unknown

◆ getProjectionMode

static QString StelMainScriptAPI::getProjectionMode ( )

staticslot

Returns: the string which identifies the current projection mode. For a list of possibl results, see setProjectionMode();

◆ getScreenHeight

static int StelMainScriptAPI::getScreenHeight ( )

staticslot

Returns: The screen height in pixels

◆ getScreenWidth

static int StelMainScriptAPI::getScreenWidth ( )

staticslot

Returns: The screen width (actually, width of Stellarium main view) in pixels

◆ getScreenXYFromAltAzi

static QVariantMap StelMainScriptAPI::getScreenXYFromAltAzi	(	const QString &	alt,
		const QString &	azi
	)

staticslot

Parameters

alt	the altitude angle [degrees]
azi	the azimuth angle [degrees]

Returns

a map of object data. Keys:

x : x coordinate on the screen
y : y coordinate on the screen

◆ getScriptRate

static double StelMainScriptAPI::getScriptRate ( )

staticslot

Returns: the current script execution rate.

◆ getSelectedObjectInfo

static QVariantMap StelMainScriptAPI::getSelectedObjectInfo ( )

staticslot

Returns: a map of object data. See description for getObjectInfo(const QString& name);

◆ getSkyCulture

static QString StelMainScriptAPI::getSkyCulture ( )

staticslot

Returns: the ID of the current sky culture (i.e. the name of the directory in which the curret sky cultures files are found, e.g. "western")

◆ getSkyCultureName

static QString StelMainScriptAPI::getSkyCultureName ( )

staticslot

Returns: the English name of the current sky culture

◆ getSkyCultureNameI18n

static QString StelMainScriptAPI::getSkyCultureNameI18n ( )

staticslot

Returns: the translated name of the current sky culture

◆ getSkyLanguage

static QString StelMainScriptAPI::getSkyLanguage ( )

staticslot

Returns: two letter language code, e.g. "en", or "de" and so on.

◆ getSoundDuration

static qint64 StelMainScriptAPI::getSoundDuration ( const QString & id )

staticslot

Parameters

id	the identifier used when loadSound was called

Returns: duration[ms] if known, 0 if unknown (e.g. during load/before playing), -1 in case of error.

◆ getSoundPosition

static qint64 StelMainScriptAPI::getSoundPosition ( const QString & id )

staticslot

Parameters

id	the identifier used when loadSound was called

Returns: position [ms] during play or pause, 0 when stopped, -1 in case of error.

◆ getStelProperty

static QVariant StelMainScriptAPI::getStelProperty ( const QString & propertyName )

staticslot

Note: This method may be very helpful for change the values in the plugins to avoid crashes when some plugin is not loaded.; See also isModuleLoaded() method

Parameters

propertyName the name of StelProperty, e.g. "Satellites.flagOrbitLines"

◆ getTimeRate

static double StelMainScriptAPI::getTimeRate ( )

staticslot

Returns: time speed as a multiple of real time.

◆ getVideoDuration

static qint64 StelMainScriptAPI::getVideoDuration ( const QString & id )

staticslot

Parameters

id	the identifier used when loadVideo() was called

◆ getVideoPosition

static qint64 StelMainScriptAPI::getVideoPosition ( const QString & id )

staticslot

Parameters

id	the identifier used when loadVideo() was called

◆ getViewAltitudeAngle

static double StelMainScriptAPI::getViewAltitudeAngle ( )

staticslot

Returns: the altitude angle in decimal degrees. 0 is horizon, zenith is 180, nadir = -180.

◆ getViewAzimuthAngle

static double StelMainScriptAPI::getViewAzimuthAngle ( )

staticslot

Returns: the azimuth angle in decimal degrees as a compass bearing i.e. 0 is North, 90 is East, 180 is South, 270 is West.

◆ getViewDecAngle

static double StelMainScriptAPI::getViewDecAngle ( )

staticslot

Returns: the Declination angle in decimal degrees. The value returned falls in the range -180 .. 180

◆ getViewDecJ2000Angle

static double StelMainScriptAPI::getViewDecJ2000Angle ( )

staticslot

Returns: the Declination angle in J2000 frame in decimal degrees.

◆ getViewRaAngle

static double StelMainScriptAPI::getViewRaAngle ( )

staticslot

Returns: the Right Ascension angle in decimal degrees. The value returned falls in the range 0 .. 360

◆ getViewRaJ2000Angle

static double StelMainScriptAPI::getViewRaJ2000Angle ( )

staticslot

Returns: the Right Ascension angle in J2000 frame in decimal degrees.

◆ isMediaPlaybackSupported

static bool StelMainScriptAPI::isMediaPlaybackSupported ( void )

staticslot

Returns: The current status of media playback support.

◆ isModuleLoaded

static bool StelMainScriptAPI::isModuleLoaded ( const QString & moduleID )

staticslot

Mostly useful to check whether a module available as plugin is active.

Note: See also setStelProperty() and getStelProperty() methods

Parameters

moduleID the QObject name of the module instance, by convention it is equal to the class name.

◆ isPlanetocentricCalculations

static bool StelMainScriptAPI::isPlanetocentricCalculations ( )

staticslot

Returns: true if the calculations is planetocentric (geocentric on Earth), else return false

◆ isRealTime

static bool StelMainScriptAPI::isRealTime ( )

staticslot

Returns: true if the time rate is normal, and the simulation time is real time, else return false

◆ jdFromDateString

static double StelMainScriptAPI::jdFromDateString	(	const QString &	dt,
		const QString &	spec
	)

staticslot

Returns: Julian day.

◆ loadSkyImage [1/4]

void StelMainScriptAPI::loadSkyImage	(	const QString &	id,
		const QString &	filename,
		const QString &	lon,
		const QString &	lat,
		double	angSize,
		double	rotation,
		double	minRes = `2.5`,
		double	maxBright = `14`,
		bool	visible = `true`,
		const QString &	frame = `"EqJ2000"`,
		bool	withAberration = `true`
	)

slot

Parameters are the same as the version of this function which takes double values for the lon and lat, except here text expressions of angles may be used.

◆ loadSkyImage [2/4]

void StelMainScriptAPI::loadSkyImage	(	const QString &	id,
		const QString &	filename,
		const QString &	lon0,
		const QString &	lat0,
		const QString &	lon1,
		const QString &	lat1,
		const QString &	lon2,
		const QString &	lat2,
		const QString &	lon3,
		const QString &	lat3,
		double	minRes = `2.5`,
		double	maxBright = `14`,
		bool	visible = `true`,
		const QString &	frame = `"EqJ2000"`,
		bool	withAberration = `true`
	)

slot

"12d 14m 8s" or "5h 26m 8s" - formats accepted by StelUtils::getDecAngle()).

◆ loadSkyImage [3/4]

void StelMainScriptAPI::loadSkyImage	(	const QString &	id,
		const QString &	filename,
		double	lon,
		double	lat,
		double	angSize,
		double	rotation,
		double	minRes = `2.5`,
		double	maxBright = `14`,
		bool	visible = `true`,
		const QString &	frame = `"EqJ2000"`,
		bool	withAberration = `true`
	)

slot

Note that the edges will not be aligned with edges at center plus/minus size!

Parameters

id	a string ID to be used when referring to this image (e.g. when changing the displayed status or deleting it.
filename	the file name of the image. If a relative path is specified, "scripts/" will be prefixed before the image is searched for using StelFileMgr.
lon	The right ascension/longitude/azimuth of the center of the image in frame degrees
lat	The declination/latitude/altitude of the center of the image in frame degrees
angSize	The angular size of the image in arc minutes
rotation	The clockwise rotation angle of the image in degrees. Use 0 for an image with top=north. (New from 2017 – This used to be 90!)
minRes	The minimum resolution setting for the image. UNCLEAR, using 2.5 seems to work well.
maxBright	The maximum brightness setting for the image, Vmag/arcmin^2. Use this to blend the brightest possible pixels with DSO. mag 15 or brighter seems ok.
visible	The initial visibility of the image
frame	one of EqJ2000\|EqDate\|EclJ2000\|EclDate\|Gal(actic)\|SuperG(alactic)\|AzAlt.
withAberration	The image, if frame==EqJ2000, undergoes aberration effect. Default: true.

Note: Images in AzAlt frame are not affected by atmosphere effects like refraction or extinction.

◆ loadSkyImage [4/4]

void StelMainScriptAPI::loadSkyImage	(	const QString &	id,
		const QString &	filename,
		double	lon0,
		double	lat0,
		double	lon1,
		double	lat1,
		double	lon2,
		double	lat2,
		double	lon3,
		double	lat3,
		double	minRes = `2.5`,
		double	maxBright = `14`,
		bool	visible = `true`,
		const QString &	frame = `"EqJ2000"`,
		bool	withAberration = `true`
	)

slot

The image is projected like a deep-sky object, with a notion for surface magnitude of the brightest parts. Transparent sections in the image are possibly rendered white, so make your image just RGB with black background. The black background covers the milky way, but is brightened by the Zodiacal light.

Parameters

id	a string ID to be used when referring to this image (e.g. when changing the displayed status or deleting it.
filename	the file name of the image. "scripts/" will be prefixed before the image is searched for using StelFileMgr.
lon0	The right ascension/longitude/azimuth of the first corner of the image in degrees (bottom left)
lat0	The declination/latitude/altitude of the first corner of the image in degrees (bottom left)
lon1	The right ascension/longitude/azimuth of the second corner of the image in degrees (bottom right)
lat1	The declination/latitude/altitude of the second corner of the image in degrees (bottom right)
lon2	The right ascension/longitude/azimuth of the third corner of the image in degrees (top right)
lat2	The declination/latitude/altitude of the third corner of the image in degrees (top right)
lon3	The right ascension/longitude/azimuth of the fourth corner of the image in degrees (top left)
lat3	The declination/latitude/altitude of the fourth corner of the image in degrees (top left)
minRes	The minimum resolution setting for the image
maxBright	The maximum brightness setting for the image
visible	The initial visibility of the image
frame	one of EqJ2000\|EqDate\|EclJ2000\|EclDate\|Gal(actic)\|SuperG(alactic)\|AzAlt.
withAberration	The image, if frame==EqJ2000, undergoes aberration effect. Default: true.

Note: Images in AzAlt frame are not affected by atmosphere effects like refraction or extinction, and also not by aberration.

◆ loadSound

void StelMainScriptAPI::loadSound	(	const QString &	filename,
		const QString &	id
	)

slot

Parameters

filename	the name of the file to load.
id	the identifier which will be used to refer to the sound when calling playSound, pauseSound, stopSound and dropSound.

◆ loadVideo

void StelMainScriptAPI::loadVideo	(	const QString &	filename,
		const QString &	id,
		float	x,
		float	y,
		bool	show = `true`,
		float	alpha = `1.0f`
	)

slot

Parameters

filename	the name of the file to load, relative to the scripts directory.
id	the identifier which will be used to refer to the video when calling playVideo(), pauseVideo(), stopVideo(), dropVideo() etc.
x	the x-coordinate (pixels from left) for the video frame.
y	the y-coordinate (pixels from top) for the video frame.
show	the visibility state for the video. (Optional since V0.15) You should load a video with show=true (or leave default), to start it immediately in native size. Else set show=false, and then call resizeVideo(), playVideo() or use playVideoPopout().
alpha	the initial alpha value of the video, defaults to 1.

◆ mapToString

static QString StelMainScriptAPI::mapToString ( const QVariantMap & map )

staticslot

Parameters

map	QVariantMap e.g. from getObjectInfo() or getLocationInfo()

Note: string values are surrounded with ", simple numeric types are printed as themselves.; More complicated value types like lists are only indicated by their type name. You must extract those (and their contents) yourself.

◆ moveToAltAzi

static void StelMainScriptAPI::moveToAltAzi	(	const QString &	alt,
		const QString &	azi,
		float	duration = `1.`
	)

staticslot

The move will run in AltAz coordinates. This will look different from moveToRaDec() when timelapse is fast. angles may be specified in a format recognised by StelUtils::getDecAngle()

Parameters

alt	the altitude angle
azi	the azimuth angle
duration	the duration of the movement in seconds

◆ moveToGalLongLat

static void StelMainScriptAPI::moveToGalLongLat	(	const QString &	lon,
		const QString &	lat,
		float	duration
	)

staticslot

Parameters

lon	the galactic longitude
dec	the galactic latitude
duration	the duration of the movement in seconds

◆ moveToObject

static void StelMainScriptAPI::moveToObject	(	const QString &	name,
		float	duration = `1.`
	)

staticslot

Parameters

name	is the English name of the object
duration	the duration of the movement in seconds

◆ moveToRaDec

static void StelMainScriptAPI::moveToRaDec	(	const QString &	ra,
		const QString &	dec,
		float	duration = `1.`
	)

staticslot

The move will run in equatorial coordinates. This will look different from moveToAltAzi() when timelapse is fast. angles may be specified in a format recognised by StelUtils::getDecAngle()

Parameters

ra	the right ascension angle
dec	the declination angle
duration	the duration of the movement in seconds

◆ moveToRaDecJ2000

static void StelMainScriptAPI::moveToRaDecJ2000	(	const QString &	ra,
		const QString &	dec,
		float	duration = `1.`
	)

staticslot

Parameters

ra	the right ascension angle
dec	the declination angle
duration	the duration of the movement in seconds

◆ moveToSelectedObject

static void StelMainScriptAPI::moveToSelectedObject ( float duration = 1. )

staticslot

Parameters

duration the duration of the movement in seconds

◆ output

static void StelMainScriptAPI::output ( const QString & s )

staticslot

Parameters

s	the message to be displayed on the output file.

◆ pauseScript

static void StelMainScriptAPI::pauseScript ( )

staticslot

Note that you may need to use a key sequence like 'Ctrl-D,R' or the GUI to resume script execution.

◆ pauseSound

void StelMainScriptAPI::pauseSound ( const QString & id )

slot

Subsequent playSound calls will resume playing from the position in the file when it was paused.

Parameters

id	the identifier used when loadSound was called

◆ pauseVideo

void StelMainScriptAPI::pauseVideo ( const QString & id )

slot

Subsequent playVideo() calls will resume playing from the position in the file when it was paused.

Parameters

id	the identifier used when loadVideo() was called

◆ playSound

void StelMainScriptAPI::playSound ( const QString & id )

slot

Parameters

id	the identifier used when loadSound was called

◆ playVideo

void StelMainScriptAPI::playVideo	(	const QString &	id,
		bool	keepVisibleAtEnd = `false`
	)

slot

Parameters

id	the identifier used when loadVideo was called

◆ playVideoPopout

void StelMainScriptAPI::playVideoPopout	(	const QString &	id,
		float	fromX,
		float	fromY,
		float	atCenterX,
		float	atCenterY,
		float	finalSizeX,
		float	finalSizeY,
		float	popupDuration,
		bool	frozenInTransition
	)

slot

The video appears out of fromX/fromY, grows within popupDuration to size finalSizeX/finalSizeY, and shrinks back towards fromX/fromY at the end during popdownDuration.

Parameters

id	the identifier used when loadVideo was called
fromX	X position of starting point, counted from left of window. May be absolute (if >1) or relative (0<X<1)
fromY	Y position of starting point, counted from top of window. May be absolute (if >1) or relative (0<Y<1)
atCenterX	X position of center of final video frame, counted from left of window. May be absolute (if >1) or relative (0<X<1)
atCenterY	Y position of center of final video frame, counted from top of window. May be absolute (if >1) or relative (0<Y<1)
finalSizeX	X size of final video frame. May be absolute (if >1) or relative to window size (0<X<1). If -1, scale proportional from finalSizeY.
finalSizeY	Y size of final video frame. May be absolute (if >1) or relative to window size (0<Y<1). If -1, scale proportional from finalSizeX.
popupDuration	duration of growing start transition (seconds)
frozenInTransition	true if video should be paused during growing/shrinking transition.

◆ refraction

static double StelMainScriptAPI::refraction	(	double	altitude,
		bool	apparent = `false`
	)

staticslot

Parameters

altitude	degrees
apparent	true to remove refraction from an apparent (observed) altitude

◆ removeSkyImage

void StelMainScriptAPI::removeSkyImage ( const QString & id )

slot

Parameters

id	the ID of the image to remove.

◆ resizeVideo

void StelMainScriptAPI::resizeVideo	(	const QString &	id,
		float	w,
		float	h
	)

slot

Parameters

id	the identifier used when loadVideo() was called
w	the new width for the widget. (if <1, relative to main view size)
h	the new height for the widget. (if <1, relative to main view size)

◆ saveOutputAs

static void StelMainScriptAPI::saveOutputAs ( const QString & filename )

staticslot

This is required to allow reading with other program on Windows while output.txt is still open.

◆ screenshot

static void StelMainScriptAPI::screenshot	(	const QString &	prefix,
		bool	invert = `false`,
		const QString &	dir = `""`,
		const bool	overwrite = `false`,
		const QString &	format = `""`
	)

staticslot

Parameters

prefix	the prefix for the file name to use
dir	the path of the directory to save the screenshot in. If none is specified, the default screenshot directory will be used.
invert	whether colors have to be inverted in the output image
overwrite	true to use exactly the prefix as filename (plus .png), and overwrite any existing file.
format	File format. One of png\|bmp\|jpg\|jpeg\|tif\|tiff\|webm\|pbm\|pgm\|ppm\|xbm\|xpm\|ico. Use current format if left empty or invalid.

◆ seekVideo

void StelMainScriptAPI::seekVideo	(	const QString &	id,
		qint64	ms,
		bool	pause = `false`
	)

slot

Parameters

id	the identifier used when loadVideo() was called
ms	the time in milliseconds from the start of the media.
pause	true if you want to pause at the requested position, keep it false to play from here.

◆ selectConstellationByName

static void StelMainScriptAPI::selectConstellationByName ( const QString & name )

staticslot

Parameters

name	the name of the constellation to select (english)

◆ selectObjectByName

static void StelMainScriptAPI::selectObjectByName	(	const QString &	name,
		bool	pointer = `false`
	)

staticslot

Parameters

name	the name of the object to select (english) If the name is "", any currently selected objects will be de-selected.
pointer	whether or not to have the selection pointer enabled

◆ setAppLanguage

static void StelMainScriptAPI::setAppLanguage ( QString langCode )

staticslot

Parameters

langCode two letter language code, e.g. "en", or "de".

◆ setBortleScaleIndex

static void StelMainScriptAPI::setBortleScaleIndex ( int index )

staticslot

Wrapper for StelSkyDrawer::setBortleScaleIndex Valid values are in the range [1,9]

See also: https://en.wikipedia.org/wiki/Bortle_scale

Parameters

index the new Bortle scale index, must be in range [1,9]

◆ setDate

static void StelMainScriptAPI::setDate	(	const QString &	dateStr,
		const QString &	spec = `"utc"`,
		const bool &	dateIsDT = `false`
	)

staticslot

Parameters

dateStr

Defines the date or offset to use. Possible formats:

Date and time according to ISO 8601, without time zone, e.g., "2008-03-24T13:21:01"
Use "now" to set Stellarium's time to the system's (presumably) real time.
Specify an offset in the form <sign>

<unit> to set the date relative to its current value. <unit> may be one of second, minute, hour, day, sol, week, month, year, with a plural 's' optionally appended, e.g., "+3.25 days", " - 1 year".

Use "now" followed by an offset to set the date relative to the system's current value, e.g., "now+1hour".

You may append "sidereal" to use units derived from the length of a sidereal day, e.g., "now +2days sidereal".

Note: When sidereal time is used, the length of time for each unit is dependent on the current planet. By contrast, when sidereal time is not specified (i.e., solar time is used) the value is conventional so that 1 day means 1 Earth Solar day.

Parameters

spec	May be "local" or "utc". Only has an effect when an ISO format string is used. Defaults to "utc".
dateIsDT	set to true indicates that the given date is formulated in Dynamical Time, i.e. with DeltaT added.

Note: For fully compatible behaviour of this function with versions 0.11.4 or earlier you should call core.setDeltaTAlgorithm("WithoutCorrection"); before running core.setDate(); for disabling DeltaT correction.; Starting with version 0.13.2 all relative dates are set without DeltaT correction.; Starting with version 0.14.0 the Boolean argument has a different meaning and default!

◆ setDeltaTAlgorithm

static void StelMainScriptAPI::setDeltaTAlgorithm ( QString algorithmName )

staticslot

Parameters

algorithmName is name of equation, e.g. "WithoutCorrection" or "EspenakMeeus"

Note

list of possible names of equation for DeltaT:

WithoutCorrection
Schoch
Clemence
IAU
AstronomicalEphemeris
TuckermanGoldstine
MullerStephenson
Stephenson1978
SchmadelZech1979
MorrisonStephenson1982
StephensonMorrison1984
StephensonHoulden
Espenak
Borkowski
SchmadelZech1988
ChaprontTouze
StephensonMorrison1995
Stephenson1997
ChaprontMeeus
JPLHorizons
MeeusSimons
MontenbruckPfleger
ReingoldDershowitz
MorrisonStephenson2004
EspenakMeeus
Reijs
Banjevic
IslamSadiqQureshi
Henriksson2017
Custom

◆ setDiskViewport

void StelMainScriptAPI::setDiskViewport ( bool b )

slot

Parameters

b	if true, sets the disk viewport on, else sets it off

◆ setDisplayAdaptationLuminance

static void StelMainScriptAPI::setDisplayAdaptationLuminance ( double cdPerSqM )

staticslot

Allow setting physical display adaptation luminance for tonemapping. The standard value is 50cd/m^2, appropriate for CRTs in dimly lit office environments. TBD true?: Increasing the value makes most of the sky darker, to allow saving the highest tones for the brightest lights (esp. the Sun).

Note: This is experimental and may not be available in later versions.

◆ setDisplayGamma

static void StelMainScriptAPI::setDisplayGamma ( double gamma )

staticslot

Parameters

gamma the gamma. Initial default value is 2.2222 (for a CRT), and sRGB LCD (and similar modern) panels try to reproduce that. This method allows overriding for other sky tones. Higher gamma makes the sky brighter.

Note: It may be technically an error to deviate from the defaults!; Only the blue-sky (atmosphere) model is influenced, not the foreground (landscape); This is experimental and may not be available in later versions.

◆ setDisplayMaxLuminance

static void StelMainScriptAPI::setDisplayMaxLuminance ( double cdPerSqM )

staticslot

Allow setting physical display properties for tonemapping. The standard value is 100cd/m^2, appropriate for CRTs. More modern screens often have more. Increasing the value makes most of the sky darker, to allow saving the highest tones for the brightest lights (esp. the Sun).

Note: This is experimental and may not be available in later versions.

◆ setFlagGravityLabels

static void StelMainScriptAPI::setFlagGravityLabels ( bool b )

staticslot

Parameters

b	if true, turn on gravity labels, else turn them off

◆ setFlipHorz

static void StelMainScriptAPI::setFlipHorz ( bool b )

staticslot

Parameters

flip	The new value (true = flipped, false = unflipped).

◆ setFlipVert

static void StelMainScriptAPI::setFlipVert ( bool b )

staticslot

Parameters

flip	The new value (true = flipped, false = unflipped).

◆ setGuiVisible

static void StelMainScriptAPI::setGuiVisible ( bool b )

staticslot

Note this only applies to GUI plugins which provide the public slot "setGuiVisible(bool)".

Parameters

b	if true, show the GUI, if false, hide the GUI.

◆ setJDay

static void StelMainScriptAPI::setJDay ( double JD )

staticslot

Parameters

JD	the Julian Day number

◆ setMaxFps

static void StelMainScriptAPI::setMaxFps ( float m )

staticslot

Parameters

m	the new maximum fps setting.

◆ setMinFps

static void StelMainScriptAPI::setMinFps ( float m )

staticslot

Usually this minimum will be switched to after there are no user events for some seconds to save power. However, if can be useful to set this to a high value to improve playing smoothness in scripts.

Parameters

m	the new minimum fps setting.

◆ setMJDay

static void StelMainScriptAPI::setMJDay ( double MJD )

staticslot

Parameters

MJD	the Modified Julian Day

◆ setMountMode

static void StelMainScriptAPI::setMountMode ( const QString & mode )

staticslot

Parameters

mode	should be "equatorial" or "azimuthal"

◆ setNightMode

static void StelMainScriptAPI::setNightMode ( bool b )

staticslot

Parameters

b	if true, set Night Mode, else set Normal Mode

◆ setObserverLocation [1/2]

static void StelMainScriptAPI::setObserverLocation	(	const QString &	id,
		double	duration = `1.`
	)

staticslot

Parameters

id	the location ID as it would be found in the database of locations - do a search in the Location window to see what where is. e.g. "York, UnitedKingdom".
duration	the number of seconds to take to move location.

◆ setObserverLocation [2/2]

static void StelMainScriptAPI::setObserverLocation	(	double	longitude,
		double	latitude,
		double	altitude,
		double	duration = `1.`,
		const QString &	name = `""`,
		const QString &	planet = `""`
	)

staticslot

Parameters

longitude	the longitude in degrees. E is +ve. values out of the range -180..180 mean that the longitude will not be set
latitude	the latitude in degrees. N is +ve. values out of the range -90..90 mean that the latitude will not be set
altitude	the new altitude in meters. values less than -1000 mean the altitude will not be set.
duration	the time for the transition from the old to the new location.
name	A name for the location (which will appear in the status bar. Use "<city>, <region>" for moving across a border.
planet	the English name of the new planet. If the planet name is not known (e.g. ""), the planet will not be set.

◆ setProjectionMode

void StelMainScriptAPI::setProjectionMode ( const QString & id )

slot

Parameters

id

the name of the projection mode to use, e.g. "ProjectionPerspective" and so on. valid values of id are:

ProjectionPerspective
ProjectionEqualArea
ProjectionStereographic
ProjectionFisheye
ProjectionHammer
ProjectionCylinder
ProjectionMercator
ProjectionOrthographic
ProjectionSinusoidal
ProjectionMiller

◆ setScriptRate

static void StelMainScriptAPI::setScriptRate ( double r )

staticslot

Parameters

r	the multiple of the normal script execution speed, i.e. if 5 is passed the script will execute 5 times faster than it would if the script rate was 1.

◆ setSelectedObjectInfo

static void StelMainScriptAPI::setSelectedObjectInfo ( const QString & level )

staticslot

Parameters

level can be "AllInfo", "DefaultInfo", "ShortInfo", "None", "Custom"

◆ setSkyCulture

void StelMainScriptAPI::setSkyCulture ( const QString & id )

slot

Parameters

id	the ID of the sky culture to set, e.g. western or inuit etc.

◆ setSkyLanguage

static void StelMainScriptAPI::setSkyLanguage ( QString langCode )

staticslot

Parameters

langCode two letter language code, e.g. "en", or "de".

◆ setSphericMirror

static void StelMainScriptAPI::setSphericMirror ( bool b )

staticslot

Parameters

b	if true, sets the spherical mirror distortion effect for viewport on, else sets it off

◆ setStelProperty

static void StelMainScriptAPI::setStelProperty	(	const QString &	propertyName,
		QVariant	propertyValue
	)

staticslot

Note: This method may be very helpful for change the values in the plugins to avoid crashes when some plugin is not loaded.; See also isModuleLoaded() method

Parameters

propertyName	the name of StelProperty, e.g. "Satellites.flagOrbitLines"
propertyValue	the value of StelProperty

◆ setTimeRate

static void StelMainScriptAPI::setTimeRate ( double ts )

staticslot

Parameters

ts	the new rate of passage of time as a multiple of real time. For example if ts is 1, time will pass at the normal rate. If ts == 10 then simulation time will pass at 10 times the normal rate. If ts is negative, simulation time will go backwards.

◆ setTimezone

static void StelMainScriptAPI::setTimezone	(	QString	tz,
		int	markAsCustom = `-1`
	)

staticslot

This only changes the currently used timezone (in StelCore). Location (database) timezone will not be touched. Valid values for tz can be found from the results of getAllTimezoneNames, including: "LMST" = Local Mean Solar Time "LTST" = Local True Solar Time

Parameters

markAsCustom

set flag/property StelCore.flagUseCTZ. (since 0.19.0) Acceptable values: 0: set off; 1: set on. Other values: don't touch. This parameter is mostly to reflect the respective setting in the Location dialog.

If tz is the default timezone for a site, markAsCustom should be 0.
For a definitively custom zone, set 1.
If unsure, set to -1.

◆ setVideoAlpha

void StelMainScriptAPI::setVideoAlpha	(	const QString &	id,
		float	alpha
	)

slot

Parameters

id	the identifier used when loadVideo() was called
alpha	the new alpha value to set.
alpha	does not work properly, only
alpha=0	makes it invisible.

◆ setVideoXY

void StelMainScriptAPI::setVideoXY	(	const QString &	id,
		float	x,
		float	y,
		bool	relative = `false`
	)

slot

Parameters

id	the identifier used when loadVideo() was called
x	the new x-coordinate for the video. (if <1, relative to main view size)
y	the new y-coordinate for the video. (if <1, relative to main view size)
relative	true if you want to move in relative coordinates, not set absolutely

◆ setViewportStretch

static void StelMainScriptAPI::setViewportStretch ( const float stretch )

staticslot

Use this e.g. in startup.ssc. Implemented for 0.15 for a setup with 5 projectors with edge blending. The 9600x1200 get squeezed somewhat which looks a bit odd. Use this stretch to compensate. Experimental! To avoid overuse, there is currently no config.ini setting available.

Note: Currently only the projected content is affected. ScreenImage, ScreenLabel is not stretched.

◆ showVideo

void StelMainScriptAPI::showVideo	(	const QString &	id,
		bool	show = `true`
	)

slot

Parameters

id	the identifier used when loadVideo() was called
show	the new visible state of the video.

Note: You must call this if you called loadVideo() with its

Parameters

show=false,else video will be played hidden.

◆ stopSound

void StelMainScriptAPI::stopSound ( const QString & id )

slot

This resets the position in the sound to the start so that subsequent playSound calls will start from the beginning.

Parameters

id	the identifier used when loadSound was called

◆ stopVideo

void StelMainScriptAPI::stopVideo ( const QString & id )

slot

This resets the position in the video to the start so that subsequent playVideo() calls will start from the beginning.

Parameters

id	the identifier used when loadVideo() was called

◆ wait

void StelMainScriptAPI::wait ( double t )

slot

Parameters

t	the number of seconds to wait

◆ waitFor

void StelMainScriptAPI::waitFor	(	const QString &	dt,
		const QString &	spec = `"utc"`
	)

slot

This function will take into account the rate (and direction) in which simulation time is passing. e.g. if a future date is specified and the time is moving backwards, the function will return immediately. If the time rate is 0, the function will not wait. This is to prevent infinite wait time.

Parameters

dt	the date string to use, format like "2012-06-06T4:44:00" or "-1428-03-04T22:23:45"
spec	"local" or "utc"

Public Slots

Signals

Public Member Functions

Properties

Detailed Description

Member Function Documentation

◆ addToSelectedObjectInfoString

◆ clear

◆ debug

◆ dropSound

◆ dropVideo

◆ getAllSkyCultureIDs

◆ getAppLanguage

◆ getBortleScaleIndex

◆ getDate

◆ getDeltaT

◆ getDeltaTAlgorithm

◆ getDeltaTsec

◆ getDiskViewport

◆ getDisplayAdaptationLuminance

◆ getDisplayGamma

◆ getDisplayMaxLuminance

◆ getEnv

◆ getFlagGravityLabels

◆ getFlipHorz

◆ getFlipVert

◆ getJDay

◆ getMaxFps

◆ getMinFps

◆ getMJDay

◆ getMountMode

◆ getNightMode

◆ getObjectInfo

◆ getObserverLocationInfo

◆ getPlatformName

◆ getProjectionMode

◆ getScreenHeight

◆ getScreenWidth

◆ getScreenXYFromAltAzi

◆ getScriptRate

◆ getSelectedObjectInfo

◆ getSkyCulture

◆ getSkyCultureName

◆ getSkyCultureNameI18n

◆ getSkyLanguage

◆ getSoundDuration

◆ getSoundPosition

◆ getStelProperty

◆ getTimeRate

◆ getVideoDuration

◆ getVideoPosition

◆ getViewAltitudeAngle

◆ getViewAzimuthAngle

◆ getViewDecAngle

◆ getViewDecJ2000Angle

◆ getViewRaAngle

◆ getViewRaJ2000Angle

◆ isMediaPlaybackSupported

◆ isModuleLoaded

◆ isPlanetocentricCalculations

◆ isRealTime

◆ jdFromDateString

◆ loadSkyImage [1/4]

◆ loadSkyImage [2/4]

◆ loadSkyImage [3/4]

◆ loadSkyImage [4/4]

◆ loadSound

◆ loadVideo

◆ mapToString

◆ moveToAltAzi

◆ moveToGalLongLat

◆ moveToObject

◆ moveToRaDec

◆ moveToRaDecJ2000

◆ moveToSelectedObject

◆ output

◆ pauseScript

◆ pauseSound

◆ pauseVideo

◆ playSound