Stellarium  0.18.3
Data Structures
Angle Measure plug-in

Data Structures

class  AngleMeasureDialog
 Main window of the Angle Measure plug-in. More...
 
class  AngleMeasure
 Main class of the Angle Measure plug-in. More...
 

Detailed Description

The Angle Measure plugin is a small tool which is used to measure the angular distance between two points on the sky.

goes misty eyed* I recall measuring the size of the Cassini Division when I was a student. It was not the high academic glamor one might expect... It was cloudy... It was rainy... The observatory lab had some old scopes set up at one end, pointing at a photograph of Saturn at the other end of the lab. We measured. We calculated. We wished we were in Hawaii.

Note
Georg Zotti extended in 2014-09, enough to call it V4.0

Modes

Equatorial Mode (original): mark start,end: distance/position angle in the sky, line rotates with sky, spherical angles influenced by refraction (numbers given on celestial sphere).

Horizontal Mode: mark start,end: distance/position angle in alt/azimuthal coordinates, line stays fixed in alt-az system. Angle may be different near to horizon because of refraction!

It is possible to link start and/or end to the sky. Distance/position angle still always in alt/azimuthal coordinates.


Data Structure Documentation

◆ AngleMeasureDialog

class AngleMeasureDialog

Public Slots

void retranslate ()
 
- Public Slots inherited from StelDialog
virtual void retranslate ()=0
 Retranslate the content of the dialog. More...
 
void setVisible (bool)
 On the first call with "true" populates the window contents.
 
void close ()
 Closes the window (the window widget is not deleted, just not visible).
 
void handleMovedTo (QPoint newPos)
 Adds dialog location to config.ini; should be connected in createDialogContent()
 
virtual void handleDialogSizeChanged (QSizeF size)
 Stores dialog sizes into config.ini; should be connected from the proxy. More...
 
QString getDialogName () const
 

Protected Member Functions

void createDialogContent ()
 Initialize the dialog widgets and connect the signals/slots.
 
- Protected Member Functions inherited from StelDialog
void connectColorButton (QToolButton *button, QString propertyName, QString iniName)
 Prepare a QToolButton so that it can receive and handle askColor() connections properly. More...
 

Additional Inherited Members

- Signals inherited from StelDialog
void visibleChanged (bool)
 
- Public Member Functions inherited from StelDialog
 StelDialog (QString dialogName="Default", QObject *parent=Q_NULLPTR)
 
bool visible () const
 Returns true if the dialog contents have been constructed and are currently shown.
 
- Protected Slots inherited from StelDialog
void askColor ()
 To be called by a connected QToolButton with a color background. More...
 
void enableKineticScrolling (bool b)
 enable kinetic scrolling. This should be connected to StelApp's StelGui signal flagUseKineticScrollingChanged.
 
void handleFontChanged ()
 connect from StelApp to handle font and font size changes.
 
- Static Protected Member Functions inherited from StelDialog
static void connectCheckBox (QAbstractButton *checkBox, const QString &actionName)
 Helper function to connect a checkbox to the StelAction with the specified name.
 
static void connectCheckBox (QAbstractButton *checkBox, StelAction *action)
 Helper function to connect a checkbox to the given StelAction.
 
static void connectIntProperty (QLineEdit *lineEdit, const QString &propName)
 Helper function to connect a QLineEdit to an integer StelProperty. More...
 
static void connectIntProperty (QSpinBox *spinBox, const QString &propName)
 Helper function to connect a QSpinBox to an integer StelProperty. More...
 
static void connectIntProperty (QComboBox *comboBox, const QString &propName)
 Helper function to connect a QComboBox to an integer StelProperty. More...
 
static void connectIntProperty (QSlider *slider, const QString &propName, int minValue, int maxValue)
 Helper function to connect a QSlider to an double or float StelProperty. More...
 
static void connectDoubleProperty (QDoubleSpinBox *spinBox, const QString &propName)
 Helper function to connect a QDoubleSpinBox to an double or float StelProperty. More...
 
static void connectDoubleProperty (QSlider *slider, const QString &propName, double minValue, double maxValue)
 Helper function to connect a QSlider to an double or float StelProperty. More...
 
static void connectBoolProperty (QAbstractButton *checkBox, const QString &propName)
 Helper function to connect a checkbox to a bool StelProperty. More...
 
- Protected Attributes inherited from StelDialog
QWidget * dialog
 The main dialog.
 
class CustomProxyproxy
 
QString dialogName
 The name should be set in derived classes' constructors and can be used to store and retrieve the panel locations.
 
QList< QWidget * > kineticScrollingList
 A list of widgets where kinetic scrolling can be activated or deactivated The list must be filled once, in the constructor or init() of fillDialog() etc. More...
 
- Properties inherited from StelDialog
bool visible
 

◆ AngleMeasure

class AngleMeasure
Author
Matthew Gates
Alexander Wolf
Georg Zotti

Public Slots

void enableAngleMeasure (bool b)
 
void useDmsFormat (bool b)
 
void showPositionAngle (bool b)
 
void showPositionAngleHor (bool b)
 
void showEquatorial (bool b)
 
void showHorizontal (bool b)
 
void showHorizontalStartSkylinked (bool b)
 
void showHorizontalEndSkylinked (bool b)
 

Signals

void flagAngleMeasureChanged (bool b)
 

Public Member Functions

virtual void init ()
 Initialize itself. More...
 
virtual void update (double deltaTime)
 Update the module with respect to the time. More...
 
virtual void draw (StelCore *core)
 Execute all the drawing functions for this module. More...
 
virtual double getCallOrder (StelModuleActionName actionName) const
 Return the value defining the order of call for the given action For example if stars.callOrder[ActionDraw] == 10 and constellation.callOrder[ActionDraw] == 11, the stars module will be drawn before the constellations. More...
 
virtual void handleKeys (class QKeyEvent *event)
 Handle key events. More...
 
virtual void handleMouseClicks (class QMouseEvent *event)
 Handle mouse clicks. More...
 
virtual bool handleMouseMoves (int x, int y, Qt::MouseButtons b)
 Handle mouse moves. More...
 
virtual bool configureGui (bool show=true)
 Detect or show the configuration GUI elements for the module. More...
 
bool isEnabled () const
 
bool isDmsFormat () const
 
bool isPaDisplayed () const
 
bool isEquatorial () const
 
bool isHorizontal () const
 
bool isHorizontalStartSkylinked () const
 
bool isHorizontalEndSkylinked () const
 
bool isHorPaDisplayed () const
 
void restoreDefaultSettings ()
 Restore the plug-in's settings to the default state. More...
 
void loadSettings ()
 Load the plug-in's settings from the configuration file. More...
 
- Public Member Functions inherited from StelModule
virtual void deinit ()
 Called before the module will be delete, and before the openGL context is suppressed. More...
 
virtual QString getModuleVersion () const
 Get the version of the module, default is stellarium main version.
 
virtual QString getAuthorName () const
 Get the name of the module author.
 
virtual QString getAuthorEmail () const
 Get the email adress of the module author.
 
virtual void handleMouseWheel (class QWheelEvent *)
 Handle mouse wheel. More...
 
virtual bool handlePinch (qreal scale, bool started)
 Handle pinch gesture events. More...
 

Properties

bool enabled
 
bool dmsFormat
 
bool paDisplayed
 

Additional Inherited Members

- Public Types inherited from StelModule
enum  StelModuleSelectAction { AddToSelection, ReplaceSelection, RemoveFromSelection }
 Enum used when selecting objects to define whether to add to, replace, or remove from the existing selection list. More...
 
enum  StelModuleActionName {
  ActionDraw, ActionUpdate, ActionHandleMouseClicks, ActionHandleMouseMoves,
  ActionHandleKeys
}
 Define the possible action for which an order is defined. More...
 
- Protected Member Functions inherited from StelModule
class StelActionaddAction (const QString &id, const QString &groupId, const QString &text, QObject *target, const char *slot, const QString &shortcut="", const QString &altShortcut="")
 convenience methods to add an action (call to slot) to the StelActionMgr object. More...
 
class StelActionaddAction (const QString &id, const QString &groupId, const QString &text, const char *slot, const QString &shortcut="", const QString &altShortcut="")
 convenience methods to add an action (call to own slot) to the StelActionMgr object. More...
 

Member Function Documentation

◆ configureGui()

virtual bool AngleMeasure::configureGui ( bool  show = true)
virtual

This is to be used with plugins to display a configuration dialog from the plugin list window.

Parameters
showif true, make the configuration GUI visible. If false, hide the config GUI if there is one.
Returns
true if the module has a configuration GUI, else false.

Reimplemented from StelModule.

◆ draw()

virtual void AngleMeasure::draw ( StelCore core)
virtual
Parameters
corethe core to use for the drawing

Reimplemented from StelModule.

◆ getCallOrder()

virtual double AngleMeasure::getCallOrder ( StelModuleActionName  actionName) const
virtual
Parameters
actionNamethe name of the action for which we want the call order
Returns
the value defining the order. The closer to 0 the earlier the module's action will be called

Reimplemented from StelModule.

◆ handleKeys()

virtual void AngleMeasure::handleKeys ( class QKeyEvent *  e)
virtual

Please note that most of the interactions will be done through the GUI module.

Parameters
ethe Key event
Returns
set the event as accepted if it was intercepted

Reimplemented from StelModule.

◆ handleMouseClicks()

virtual void AngleMeasure::handleMouseClicks ( class QMouseEvent *  )
virtual

Please note that most of the interactions will be done through the GUI module.

Returns
set the event as accepted if it was intercepted

Reimplemented from StelModule.

◆ handleMouseMoves()

virtual bool AngleMeasure::handleMouseMoves ( int  x,
int  y,
Qt::MouseButtons  b 
)
virtual

Please note that most of the interactions will be done through the GUI module.

Returns
true if the event was intercepted

Reimplemented from StelModule.

◆ init()

virtual void AngleMeasure::init ( )
virtual

If the initialization takes significant time, the progress should be displayed on the loading bar.

Implements StelModule.

◆ loadSettings()

void AngleMeasure::loadSettings ( )

Settings are kept in the "AngleMeasure" section in Stellarium's configuration file. If no such section exists, it will load default values.

See also
saveSettings(), restoreSettings()

◆ restoreDefaultSettings()

void AngleMeasure::restoreDefaultSettings ( )

Replace the plug-in's settings in Stellarium's configuration file with the default values and re-load them. Uses internally loadSettings() and saveSettings().

◆ update()

virtual void AngleMeasure::update ( double  deltaTime)
virtual
Parameters
deltaTimethe time increment in second since last call.

Implements StelModule.