Telescope Control plug-in

(Difference between revisions)
Jump to: navigation, search
(Serial cable connection: skeleton; + explanation about serial ports)
(split the large images into smaller ones)
Line 8: Line 8:
  
 
== Using the Telescope Control plug-in ==
 
== Using the Telescope Control plug-in ==
 +
=== Prerequisites ===
 +
=== Main window ===
 +
http://img201.imageshack.us/img201/6854/telescopecontroltabtele.png
  
=== Configuration ===
 
 
==== Main window ====
 
http://img201.imageshack.us/img201/6854/telescopecontroltabtele.png
 
  
 +
=== Telescope connection configuration window ===
 +
The telescope connection configuration window ([http://img201.imageshack.us/img201/1958/telescopecontroladdtele.png full image])...
  
==== Serial cable connection ====
+
==== Connection type ====
http://img201.imageshack.us/img201/1958/telescopecontroladdtele.png
+
http://img697.imageshack.us/img697/9157/telescopecontrolconnect.png
  
'''Telescope properties:'''
+
==== Telescope properties ====
 +
http://img89.imageshack.us/img89/7180/telescopecontrolproptel.png
 
;Name
 
;Name
 
;Connection delay
 
;Connection delay
 
;Start/connect at startup
 
;Start/connect at startup
  
'''Device settings:'''
+
==== Device settings ====
 +
http://img89.imageshack.us/img89/9915/telescopecontrolpropdev.png
 
;Serial port
 
;Serial port
 
:sets the serial port used by the telescope.
 
:sets the serial port used by the telescope.
Line 31: Line 34:
 
:This will list all devices, the full name of your serial port should be somewhere in the list (for example, "/dev/cu.usbserial-FTDFZVMK").
 
:This will list all devices, the full name of your serial port should be somewhere in the list (for example, "/dev/cu.usbserial-FTDFZVMK").
 
;Device model
 
;Device model
 +
:
  
 
+
==== Connection settings ====
'''Connection settings:'''
+
http://img697.imageshack.us/img697/1374/telescopecontrolpropcon.png
 
;Host
 
;Host
 
;Port
 
;Port
Line 39: Line 43:
 
'''User interface settings:'''
 
'''User interface settings:'''
 
* see the [[#Field of view circles|FOV circles]] section below
 
* see the [[#Field of view circles|FOV circles]] section below
 
==== Network connection or third party application ====
 
http://img638.imageshack.us/img638/2923/telescopecontroladdconn.png
 
  
 
==== Field of view circles ====
 
==== Field of view circles ====
Line 60: Line 61:
  
 
== Advanced use ==
 
== Advanced use ==
 +
 +
== Supported devices ==
 +
:''Main page: [[Telescope Compatibility]]''
  
 
== External links ==
 
== External links ==

Revision as of 15:24, 17 March 2010

UNDER CONSTRUCTION

The Telescope Control plug-in allows Stellarium to control a telescope on a computerized mount (a "Go To" telescope) and offers a graphical user interface for setting up the connection.

It has been included as a static plug-in in Stellarium since version 0.10.3.

This page covers version 0.1.9, the one distributed with Stellarium 0.10.3 and 0.10.4.

Contents

Using the Telescope Control plug-in

Prerequisites

Main window

telescopecontroltabtele.png


Telescope connection configuration window

The telescope connection configuration window (full image)...

Connection type

telescopecontrolconnect.png

Telescope properties

telescopecontrolproptel.png

Name
Connection delay
Start/connect at startup

Device settings

telescopecontrolpropdev.png

Serial port
sets the serial port used by the telescope.
The list contains the default values for the first four serial ports. On Windows, these are COM1 to COM4, on Linux these are /dev/ttyS0 to /dev/ttyS3, on Mac OS X the list is empty as it names its ports in a peculiar way. On all three platforms the list can be edited and new values can be added. (If you are using a USB-to-serial adapter, the default serial port of your telescope most probably is not in the list.)
To list all valid serial port names in Mac OS X, open a terminal and type:
ls /dev/*
This will list all devices, the full name of your serial port should be somewhere in the list (for example, "/dev/cu.usbserial-FTDFZVMK").
Device model

Connection settings

telescopecontrolpropcon.png

Host
Port

User interface settings:

Field of view circles

A series of circles representing different fields of view can be added around the telescope marker. This is a relic from the times before the Oculars plug-in existed.

telescopecontrolcircles.png

In the telescope configuration window, click on "User Interface Settings". Mark the "Show FOV circles" options, then enter a list of values separated with comas in the field below. The values are interpreted as degrees of arc.

This can be used in combination with the Stellarium Virtual Telescope to display a moving marker with the Telrad circles. In this case, the list of FOV values should be "0.5, 2, 4".

Sending commands

Once a telescope is successfully started/connected, Stellarium displays a telescope reticle labelled with the telescope's name on its current position in the sky. The reticle is an object like every other in Stellarium - it can be selected with the mouse, it can be tracked and it appears as an object in the Search window.

To send a "slew" command to the telescope, select an object (e.g. a star) and press the number of the telescope while holding down the Ctrl key. (For example, Ctrl+1 for telescope #1.)

As of version 0.1.9/Stellarium 0.10.4, there is no way to slew to a specific set of coordinates.

Advanced use

Supported devices

Main page: Telescope Compatibility

External links

Personal tools
Namespaces
Variants
Actions
in this wiki
other languages
Toolbox