Telescope Compatibility

From Stellarium Wiki
(Difference between revisions)
Jump to: navigation, search
(splitting into two sections)
(Undo revision 12311 by Thebig-J (talk))
 
(4 intermediate revisions by 3 users not shown)
Line 13: Line 13:
 
* Any telescope compatible with the '''Meade LX-200'''/Meade Autostar controller
 
* Any telescope compatible with the '''Meade LX-200'''/Meade Autostar controller
 
** the '''Meade ETX-70''' with the #494 Autostar controller and the #506 Connector Cable Set. It is a bit slow, so its default setting of "Connection delay" is 1.5 seconds instead of 0.5 seconds.
 
** the '''Meade ETX-70''' with the #494 Autostar controller and the #506 Connector Cable Set. It is a bit slow, so its default setting of "Connection delay" is 1.5 seconds instead of 0.5 seconds.
** the '''Losmandy G11''' telescope mount
+
** the '''Losmandy G11 (with gemini)''' telescope mount
 
** the '''Wildcard Innovations Argo Navis''' Digital Telescope Computer (an advanced digital setting circle). Just don't forget to set it to Meade compatibility mode and set the baud rate to 9600B. [http://www.iceinspace.com.au/forum/showpost.php?p=554948&postcount=18]  
 
** the '''Wildcard Innovations Argo Navis''' Digital Telescope Computer (an advanced digital setting circle). Just don't forget to set it to Meade compatibility mode and set the baud rate to 9600B. [http://www.iceinspace.com.au/forum/showpost.php?p=554948&postcount=18]  
*** [http://www.iceinspace.com.au/forum/showthread.php?t=55654 Ice in Space forums: ArgoNavis & Stellarium]
 
 
* Any telescope compatible with the '''Celestron NexStar'''
 
* Any telescope compatible with the '''Celestron NexStar'''
 +
** the '''Sky-Watcher SynScan AZ''' GOTO mount, used in a number of telescopes (a list is available at [http://www.opticalvision.co.uk/astronomical_telescopes/sky-watcher/sysncan_az_go-to_computerised_telescopes Optical Vision's website]). "SynScan" is also the name of the hand controller used in other Sky-Watcher GoTo mounts eg EQ6, HEQ5-Pro etc, and it seems that any mount that uses a SynScan controller version 3.0 or greater is supported by Stellarium, as it uses the NexStar protocol.
  
 
== Supported by the old telescope servers ==
 
== Supported by the old telescope servers ==

Latest revision as of 03:51, 5 July 2012

WARNING: Stellarium CANNOT prevent your telescope from being pointed at the Sun.
  • Never point your telescope at the Sun without a proper solar filter installed. The powerful light amplified by the telescope WILL cause irreversible damage to your eyes and/or your equipment.
  • Even if you don't do it deliberately, a slew during daylight hours may cause your telescope to point at the sun on its way to the given destination, so it is strongly recommended to avoid using the telescope control feature before sunset without appropriate protection.

If you abuse this feature to point your telescope to the sun and ruin your telescope, your eyes, your children's eyes or whatever, then this is not our fault, but yours.

Please read the explanation on the Telescope Control page first.

This is an incomplete, badly maintained list of the telescopes, telescope mounts and other hardware that can be controlled by Stellarium without the help of third-party software.

[edit] Supported by the Telescope Control plug-in

Main page: Telescope Control plug-in

The Telescope Control plug-in supports two classes of telescopes: telescopes compatible with the Meade LX200 (the Meade Autostar controller) and telescopes compatible with the Celestron NexStar. All devices listed in the "Device model" list are convenience definitions using one of the two classes.

The Telescope Control plug-in should work with:

  • Any telescope compatible with the Meade LX-200/Meade Autostar controller
    • the Meade ETX-70 with the #494 Autostar controller and the #506 Connector Cable Set. It is a bit slow, so its default setting of "Connection delay" is 1.5 seconds instead of 0.5 seconds.
    • the Losmandy G11 (with gemini) telescope mount
    • the Wildcard Innovations Argo Navis Digital Telescope Computer (an advanced digital setting circle). Just don't forget to set it to Meade compatibility mode and set the baud rate to 9600B. [1]
  • Any telescope compatible with the Celestron NexStar
    • the Sky-Watcher SynScan AZ GOTO mount, used in a number of telescopes (a list is available at Optical Vision's website). "SynScan" is also the name of the hand controller used in other Sky-Watcher GoTo mounts eg EQ6, HEQ5-Pro etc, and it seems that any mount that uses a SynScan controller version 3.0 or greater is supported by Stellarium, as it uses the NexStar protocol.

[edit] Supported by the old telescope servers

Main page: Telescope Control (client-server)

The telescope server program (short: server) is a stand-alone program that can operate exactly one telescope, and can simultaneously serve one or many clients (like Stellarium). The terms server and client refer to the respective role in TCP/IP communication.

Make Model Operating System Server (see note 1) Status Notes
Meade Autostar Linux TelescopeServerLx200 Untested
Meade Autostar Windows TelescopeServerLx200.exe Supported see note 2
Meade Autostar MacOS X TelescopeServerLx200 Untested currently source code only
Meade LX200 Linux TelescopeServerLx200 Supported Original reference implementation, used by the developer
Meade LX200 Windows TelescopeServerLx200.exe Supported Original reference implementation, seems to work well with different kinds of Windows
Meade LX200 MacOS X TelescopeServerLx200 Untested currently source code only
Losmandy G11 Linux/Windows TelescopeServerLx200(.exe) Supported successfully used by some guy in the forum
Celestron NexStar Linux/Windows TelescopeServerNexStar(.exe) Untested by Michael Heinz
Celestron NexStar Mac TelescopeServerNexStar Supported by Michael Heinz
SkyWatcher SkyMax 127 GOTO Linux TelescopeServerNexStar Supported by Renato Golin
Astelco full range (OpenTPL) Linux, Solaris TelescopeServerRTS2 Supported see note 3
CAHA 1.23m Solaris TelescopeServerRTS2 Supported see note 3
Software Bisque Paramount Linux TelescopeServerRTS2 Supported see note 3
Astrolab various custom models Linux TelescopeServerRTS2 Supported see note 3

[edit] Notes

  1. The name of the binary should uniquely identify the telescope communication protocol it is using for communicating with the telescope. Naming convention for programmers: The name of the driver refers to the class in the driver source code. This is usually similar to the name of the resulting binary (program), but to be certain, look inside the .hpp file which is used to make the binary. It might be a good idea to adopt the convention of making the resulting binary have the same name as the driver class.
  2. Autostar ETX70 with 494 controller and 506 cable. The original telescopeserverLX200.exe was too fast for the slow link connection to the 494 controller. The problem has been repaired with the latest version of TelescopeServerLx200.exe. To get a smoother move of the cross hair edit the time delay in the config.ini file from 500000 to 1500000. B.G
  3. RTS2: for RTS2 models, you will need RTS2 driver. You can obtain it from [[2]].
Personal tools
Namespaces
Variants
Actions
in this wiki
other languages
Toolbox