Doxyfile.cmake   Doxyfile.cmake
# Doxyfile 1. # Doxyfile 1.8.0
# This file describes the settings to be used by the documentation system # This file describes the settings to be used by the documentation system
# doxygen (www.doxygen.org) for a project # doxygen (www.doxygen.org) for a project.
# #
# All text after a hash (#) is considered a comment and will be ignored # All text after a hash (#) is considered a comment and will be ignored.
# The format is: # The format is:
# TAG = value [value, ...] # TAG = value [value, ...]
# For lists items can also be appended using: # For lists items can also be appended using:
# TAG += value [value, ...] # TAG += value [value, ...]
# Values that contain spaces should be placed between quotes (" ") # Values that contain spaces should be placed between quotes (" ").
#-------------------------------------------------------------------------- - #-------------------------------------------------------------------------- -
# Project related configuration options # Project related configuration options
#-------------------------------------------------------------------------- - #-------------------------------------------------------------------------- -
# This tag specifies the encoding used for all characters in the config fil e # This tag specifies the encoding used for all characters in the config fil e
# that follow. The default is UTF-8 which is also the encoding used for all # that follow. The default is UTF-8 which is also the encoding used for all
# text before the first occurrence of this tag. Doxygen uses libiconv (or t he # text before the first occurrence of this tag. Doxygen uses libiconv (or t he
# iconv built into libc) for the transcoding. See # iconv built into libc) for the transcoding. See
# http://www.gnu.org/software/libiconv for the list of possible encodings. # http://www.gnu.org/software/libiconv for the list of possible encodings.
DOXYFILE_ENCODING = UTF-8 DOXYFILE_ENCODING = UTF-8
# The PROJECT_NAME tag is a single word (or sequence of # The PROJECT_NAME tag is a single word (or sequence of words) that should
that should identify the project. # identify the project. Note that if you do not use Doxywizard you need
# to put quotes around the project name if it contains spaces.
PROJECT_NAME = Stellarium PROJECT_NAME = Stellarium
# The PROJECT_NUMBER tag can be used to enter a project or revision number. # The PROJECT_NUMBER tag can be used to enter a project or revision number.
# This could be handy for archiving the generated documentation or # This could be handy for archiving the generated documentation or
# if some version control system is used. # if some version control system is used.
PROJECT_NUMBER = @VERSION@ PROJECT_NUMBER = @VERSION@
# Using the PROJECT_BRIEF tag one can provide an optional one line descript
ion
# for a project that appears at the top of each page and should give viewer
# a quick idea about the purpose of the project. Keep the description short
.
PROJECT_BRIEF =
# With the PROJECT_LOGO tag one can specify an logo or icon that is
# included in the documentation. The maximum height of the logo should not
# exceed 55 pixels and the maximum width should not exceed 200 pixels.
# Doxygen will copy the logo to the output directory.
PROJECT_LOGO = @PROJECT_SOURCE_DIR@/doc/images/stellarium-logo.pn
g
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
# base path where the generated documentation will be put. # base path where the generated documentation will be put.
# If a relative path is entered, it will be relative to the location # If a relative path is entered, it will be relative to the location
# where doxygen was started. If left blank the current directory will be us ed. # where doxygen was started. If left blank the current directory will be us ed.
OUTPUT_DIRECTORY = doc OUTPUT_DIRECTORY = doc
# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
# 4096 sub-directories (in 2 levels) under the output directory of each out put # 4096 sub-directories (in 2 levels) under the output directory of each out put
# format and will distribute the generated files over these directories. # format and will distribute the generated files over these directories.
skipping to change at line 60 skipping to change at line 74
CREATE_SUBDIRS = NO CREATE_SUBDIRS = NO
# The OUTPUT_LANGUAGE tag is used to specify the language in which all # The OUTPUT_LANGUAGE tag is used to specify the language in which all
# documentation generated by doxygen is written. Doxygen will use this # documentation generated by doxygen is written. Doxygen will use this
# information to generate all constant output in the proper language. # information to generate all constant output in the proper language.
# The default language is English, other supported languages are: # The default language is English, other supported languages are:
# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German , # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German ,
# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, # messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, # Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. # Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
OUTPUT_LANGUAGE = English OUTPUT_LANGUAGE = English
# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
# include brief member descriptions after the members that are listed in # include brief member descriptions after the members that are listed in
# the file and class documentation (similar to JavaDoc). # the file and class documentation (similar to JavaDoc).
# Set to NO to disable this. # Set to NO to disable this.
BRIEF_MEMBER_DESC = YES BRIEF_MEMBER_DESC = YES
skipping to change at line 139 skipping to change at line 153
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
# the path mentioned in the documentation of a class, which tells # the path mentioned in the documentation of a class, which tells
# the reader which header file to include in order to use a class. # the reader which header file to include in order to use a class.
# If left blank only the name of the header file containing the class # If left blank only the name of the header file containing the class
# definition is used. Otherwise one should specify the include paths that # definition is used. Otherwise one should specify the include paths that
# are normally passed to the compiler using the -I flag. # are normally passed to the compiler using the -I flag.
STRIP_FROM_INC_PATH = STRIP_FROM_INC_PATH =
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
# (but less readable) file names. This can be useful i # (but less readable) file names. This can be useful if your file system
# doesn't support long names like on DOS, Mac, or CD-ROM. # doesn't support long names like on DOS, Mac, or CD-ROM.
SHORT_NAMES = NO SHORT_NAMES = NO
# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
# will interpret the first line (until the first dot) of a JavaDoc-style # will interpret the first line (until the first dot) of a JavaDoc-style
# comment as the brief description. If set to NO, the JavaDoc # comment as the brief description. If set to NO, the JavaDoc
# (thus requiring an explicit @brief command for a brief description.) # (thus requiring an explicit @brief command for a brief description.)
skipping to change at line 194 skipping to change at line 208
# This tag can be used to specify a number of aliases that acts # This tag can be used to specify a number of aliases that acts
# as commands in the documentation. An alias has the form "name=value". # as commands in the documentation. An alias has the form "name=value".
# For example adding "sideeffect=\par Side Effects:\n" will allow you to # For example adding "sideeffect=\par Side Effects:\n" will allow you to
# put the command \sideeffect (or @sideeffect) in the documentation, which # put the command \sideeffect (or @sideeffect) in the documentation, which
# will result in a user-defined paragraph with heading "Side Effects:". # will result in a user-defined paragraph with heading "Side Effects:".
# You can put \n's in the value part of an alias to insert newlines. # You can put \n's in the value part of an alias to insert newlines.
ALIASES = ALIASES =
# This tag can be used to specify a number of word-keyword mappings (TCL on
ly).
# A mapping has the form "name=value". For example adding
# "class=itcl::class" will allow you to use the command class in the
# itcl::class meaning.
TCL_SUBST =
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
# sources only. Doxygen will then generate output that is more tailored for C. # sources only. Doxygen will then generate output that is more tailored for C.
# For instance, some of the names that are used will be different. The list # For instance, some of the names that are used will be different. The list
# of all members will be omitted, etc. # of all members will be omitted, etc.
OPTIMIZE_OUTPUT_FOR_C = NO OPTIMIZE_OUTPUT_FOR_C = NO
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
# sources only. Doxygen will then generate output that is more tailored for # sources only. Doxygen will then generate output that is more tailored for
# Java. For instance, namespaces will be presented as packages, qualified # Java. For instance, namespaces will be presented as packages, qualified
skipping to change at line 220 skipping to change at line 241
# Fortran. # Fortran.
OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_FOR_FORTRAN = NO
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
# sources. Doxygen will then generate output that is tailored for # sources. Doxygen will then generate output that is tailored for
# VHDL. # VHDL.
OPTIMIZE_OUTPUT_VHDL = NO OPTIMIZE_OUTPUT_VHDL = NO
# Doxygen selects the parser to use depending on the extension of the files # Doxygen selects the parser to use depending on the extension of the files
it it
# With this tag you can assign which parser to use for a given # parses. With this tag you can assign which parser to use for a given exte
# Doxygen has a built-in mapping, but you can override or extend it using t nsion.
his # Doxygen has a built-in mapping, but you can override or extend it using t
# The format is ext=language, where ext is a file extension, and his
one of # tag. The format is ext=language, where ext is a file extension, and langu
the parsers supported by doxygen: IDL, Java, Javascript, C, C++, D, age
# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp
Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen , C,
treat # C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to
.inc files as Fortran files (default is PHP), and .f files as C (default make
is Fortran), # doxygen treat .inc files as Fortran files (default is PHP), and .f files
use: inc=Fortran f=C. Note that for custom you also need to as C
FILE_PATTERNS otherwise the files are not read by # (default is Fortran), use: inc=Fortran f=C. Note that for custom extensio
ns
# you also need to set FILE_PATTERNS otherwise the files are not read by do
xygen.
EXTENSION_MAPPING = EXTENSION_MAPPING =
# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes a
ll
# comments according to the Markdown format, which allows for more readable
# documentation. See http://daringfireball.net/projects/markdown/ for detai
ls.
# The output of markdown processing is further processed by doxygen, so you
# can mix doxygen, HTML, and XML commands with Markdown formatting.
# Disable only in case of backward compatibilities issues.
MARKDOWN_SUPPORT = YES
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not w ant # If you use STL classes (i.e. std::string, std::vector, etc.) but do not w ant
# to include (a tag file for) the STL sources as input, then you should # to include (a tag file for) the STL sources as input, then you should
# set this tag to YES in order to let doxygen match functions declarations and # set this tag to YES in order to let doxygen match functions declarations and
# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
# func(std::string) {}). This also make the inheritance and collaboration # func(std::string) {}). This also makes the inheritance and collaboration
# diagrams that involve STL classes more complete and accurate. # diagrams that involve STL classes more complete and accurate.
BUILTIN_STL_SUPPORT = YES BUILTIN_STL_SUPPORT = YES
# If you use Microsoft's C++/CLI language, you should set this option to YE S to # If you use Microsoft's C++/CLI language, you should set this option to YE S to
# enable parsing support. # enable parsing support.
CPP_CLI_SUPPORT = NO CPP_CLI_SUPPORT = NO
# Set the SIP_SUPPORT tag to YES if your project consists of sip sources on ly. # Set the SIP_SUPPORT tag to YES if your project consists of sip sources on ly.
# Doxygen will parse them like normal C++ but will assume all classes use p ublic # Doxygen will parse them like normal C++ but will assume all classes use p ublic
# instead of private inheritance when no explicit protection keyword is pre sent. # instead of private inheritance when no explicit protection keyword is pre sent.
SIP_SUPPORT = NO SIP_SUPPORT = NO
# For Microsoft's IDL there are propget and propput attributes to indicate getter # For Microsoft's IDL there are propget and propput attributes to indicate getter
# and setter methods for a property. Setting this option to YES (the defaul t) # and setter methods for a property. Setting this option to YES (the defaul t)
# will make doxygen replace the get and set methods by a property in the # will make doxygen replace the get and set methods by a property in the
# documentation. This will only work if the methods are indeed getting or # documentation. This will only work if the methods are indeed getting or
# setting a simple type. If this is not the case, or you want to show the # setting a simple type. If this is not the case, or you want to show the
# methods anyway, you should set this option to NO. # methods anyway, you should set this option to NO.
IDL_PROPERTY_SUPPORT = YES IDL_PROPERTY_SUPPORT = YES
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_ DOC # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_ DOC
# tag is set to YES, then doxygen will reuse the documentation of the first # tag is set to YES, then doxygen will reuse the documentation of the first
# member in the group (if any) for the other members of the group. By defau lt # member in the group (if any) for the other members of the group. By defau lt
# all members of a group must be documented explicitly. # all members of a group must be documented explicitly.
skipping to change at line 275 skipping to change at line 306
DISTRIBUTE_GROUP_DOC = NO DISTRIBUTE_GROUP_DOC = NO
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
# the same type (for instance a group of public functions) to be put as a # the same type (for instance a group of public functions) to be put as a
# subgroup of that type (e.g. under the Public Functions section). Set it t o # subgroup of that type (e.g. under the Public Functions section). Set it t o
# NO to prevent subgrouping. Alternatively, this can be done per class usin g # NO to prevent subgrouping. Alternatively, this can be done per class usin g
# the \nosubgrouping command. # the \nosubgrouping command.
SUBGROUPING = YES SUBGROUPING = YES
# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
# unions are shown inside the group in which they are included (e.g. using
# @ingroup) instead of on a separate page (for HTML and Man pages) or
# section (for LaTeX and RTF).
INLINE_GROUPED_CLASSES = NO
# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
# unions with only public data fields will be shown inline in the documenta
tion
# of the scope in which they are defined (i.e. file, namespace, or group
# documentation), provided this scope is documented. If set to NO (the defa
ult),
# structs, classes, and unions are shown on a separate page (for HTML and M
an
# pages) or section (for LaTeX and RTF).
INLINE_SIMPLE_STRUCTS = NO
# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or en um # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or en um
# is documented as struct, union, or enum with the name of the typedef. So # is documented as struct, union, or enum with the name of the typedef. So
# typedef struct TypeS {} TypeT, will appear in the documentation as a stru ct # typedef struct TypeS {} TypeT, will appear in the documentation as a stru ct
# with name TypeT. When disabled the typedef will appear as a member of a f ile, # with name TypeT. When disabled the typedef will appear as a member of a f ile,
# namespace, or class. And the struct will be named TypeS. This can typical ly # namespace, or class. And the struct will be named TypeS. This can typical ly
# be useful for C code in case the coding convention dictates that all comp ound # be useful for C code in case the coding convention dictates that all comp ound
# types are typedef'ed and only the typedef is referenced, never the tag na me. # types are typedef'ed and only the typedef is referenced, never the tag na me.
TYPEDEF_HIDES_STRUCT = NO TYPEDEF_HIDES_STRUCT = NO
# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to # The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
# determine which symbols to keep in memory and which to flush to disk. # determine which symbols to keep in memory and which to flush to disk.
# When the cache is full, less often used symbols will be written to disk. # When the cache is full, less often used symbols will be written to disk.
# For small to medium size projects (<1000 input files) the default value i s # For small to medium size projects (<1000 input files) the default value i s
# probably good enough. For larger projects a too small cache size can caus e # probably good enough. For larger projects a too small cache size can caus e
# doxygen to be busy swapping symbols to and from disk most of the time # doxygen to be busy swapping symbols to and from disk most of the time
# causing a significant performance penalty. # causing a significant performance penalty.
# If the system has enough physical memory increasing the cache will improv e the # If the system has enough physical memory increasing the cache will improv e the
# performance by keeping more symbols in memory. Note that the value works on # performance by keeping more symbols in memory. Note that the value works on
# a logarithmic scale so increasing the size by one will rougly double the # a logarithmic scale so increasing the size by one will roughly double the
# memory usage. The cache size is given by this formula: # memory usage. The cache size is given by this formula:
# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, # 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
# corresponding to a cache size of 2^16 = 65536 symbols # corresponding to a cache size of 2^16 = 65536 symbols.
SYMBOL_CACHE_SIZE = 0 SYMBOL_CACHE_SIZE = 0
# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can
be
# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
# their name and scope. Since this can be an expensive process and often th
e
# same symbol appear multiple times in the code, doxygen keeps a cache of
# pre-resolved symbols. If the cache is too small doxygen will become slowe
r.
# If the cache is too large, memory is wasted. The cache size is given by t
his
# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default i
s 0,
# corresponding to a cache size of 2^16 = 65536 symbols.
LOOKUP_CACHE_SIZE = 0
#-------------------------------------------------------------------------- - #-------------------------------------------------------------------------- -
# Build related configuration options # Build related configuration options
#-------------------------------------------------------------------------- - #-------------------------------------------------------------------------- -
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
# documentation are documented, even if no documentation was available. # documentation are documented, even if no documentation was available.
# Private class members and static file members will be hidden unless # Private class members and static file members will be hidden unless
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
EXTRACT_ALL = NO EXTRACT_ALL = NO
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
# will be included in the documentation. # will be included in the documentation.
EXTRACT_PRIVATE = NO EXTRACT_PRIVATE = NO
# If the EXTRACT_PACKAGE tag is set to YES all members with package or inte
rnal scope will be included in the documentation.
EXTRACT_PACKAGE = NO
# If the EXTRACT_STATIC tag is set to YES all static members of a file # If the EXTRACT_STATIC tag is set to YES all static members of a file
# will be included in the documentation. # will be included in the documentation.
EXTRACT_STATIC = NO EXTRACT_STATIC = NO
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
# defined locally in source files will be included in the documentation. # defined locally in source files will be included in the documentation.
# If set to NO only classes defined in header files are included. # If set to NO only classes defined in header files are included.
EXTRACT_LOCAL_CLASSES = NO EXTRACT_LOCAL_CLASSES = NO
skipping to change at line 339 skipping to change at line 401
# methods, which are defined in the implementation section but not in # methods, which are defined in the implementation section but not in
# the interface are included in the documentation. # the interface are included in the documentation.
# If set to NO (the default) only methods in the interface are included. # If set to NO (the default) only methods in the interface are included.
EXTRACT_LOCAL_METHODS = NO EXTRACT_LOCAL_METHODS = NO
# If this flag is set to YES, the members of anonymous namespaces will be # If this flag is set to YES, the members of anonymous namespaces will be
# extracted and appear in the documentation as a namespace called # extracted and appear in the documentation as a namespace called
# 'anonymous_namespace{file}', where file will be replaced with the base # 'anonymous_namespace{file}', where file will be replaced with the base
# name of the file that contains the anonymous namespace. By default # name of the file that contains the anonymous namespace. By default
# anonymous namespace are hidden. # anonymous namespaces are hidden.
EXTRACT_ANON_NSPACES = NO EXTRACT_ANON_NSPACES = NO
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
# undocumented members of documented classes, files or namespaces. # undocumented members of documented classes, files or namespaces.
# If set to NO (the default) these members will be included in the # If set to NO (the default) these members will be included in the
# various overviews, but no documentation section is generated. # various overviews, but no documentation section is generated.
# This option has no effect if EXTRACT_ALL is enabled. # This option has no effect if EXTRACT_ALL is enabled.
HIDE_UNDOC_MEMBERS = NO HIDE_UNDOC_MEMBERS = NO
skipping to change at line 424 skipping to change at line 486
SORT_MEMBER_DOCS = YES SORT_MEMBER_DOCS = YES
# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
# brief documentation of file, namespace and class members alphabetically # brief documentation of file, namespace and class members alphabetically
# by member name. If set to NO (the default) the members will appear in # by member name. If set to NO (the default) the members will appear in
# declaration order. # declaration order.
SORT_BRIEF_DOCS = NO SORT_BRIEF_DOCS = NO
# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
(brief and detailed) documentation of class members so that constructors # will sort the (brief and detailed) documentation of class members so that
and destructors are listed first. If set to NO (the default) the # constructors and destructors are listed first. If set to NO (the default)
will appear in the respective orders defined by SORT_MEMBER_DOCS and # the constructors will appear in the respective orders defined by
This tag will be ignored for brief docs if SORT_BRIEF_DOCS is # SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. # This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
SORT_MEMBERS_CTORS_1ST = YES SORT_MEMBERS_CTORS_1ST = YES
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
# hierarchy of group names into alphabetical order. If set to NO (the defau lt) # hierarchy of group names into alphabetical order. If set to NO (the defau lt)
# the group names will appear in their defined order. # the group names will appear in their defined order.
SORT_GROUP_NAMES = NO SORT_GROUP_NAMES = NO
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
# sorted by fully-qualified names, including namespaces. If set to # sorted by fully-qualified names, including namespaces. If set to
# NO (the default), the class list will be sorted only by class name, # NO (the default), the class list will be sorted only by class name,
# not including the namespace part. # not including the namespace part.
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
# Note: This option applies only to the class list, not to the # Note: This option applies only to the class list, not to the
# alphabetical list. # alphabetical list.
SORT_BY_SCOPE_NAME = YES SORT_BY_SCOPE_NAME = YES
# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
# do proper type resolution of all parameters of a function it will reject
a
# match between the prototype and the implementation of a member function e
ven
# if there is only one candidate or it is obvious which candidate to choose
# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxyge
n
# will still accept a match between prototype and implementation in such ca
ses.
STRICT_PROTO_MATCHING = NO
# The GENERATE_TODOLIST tag can be used to enable (YES) or # The GENERATE_TODOLIST tag can be used to enable (YES) or
# disable (NO) the todo list. This list is created by putting \todo # disable (NO) the todo list. This list is created by putting \todo
# commands in the documentation. # commands in the documentation.
GENERATE_TODOLIST = NO GENERATE_TODOLIST = NO
# The GENERATE_TESTLIST tag can be used to enable (YES) or # The GENERATE_TESTLIST tag can be used to enable (YES) or
# disable (NO) the test list. This list is created by putting \test # disable (NO) the test list. This list is created by putting \test
# commands in the documentation. # commands in the documentation.
skipping to change at line 474 skipping to change at line 551
# \deprecated commands in the documentation. # \deprecated commands in the documentation.
GENERATE_DEPRECATEDLIST= YES GENERATE_DEPRECATEDLIST= YES
# The ENABLED_SECTIONS tag can be used to enable conditional # The ENABLED_SECTIONS tag can be used to enable conditional
# documentation sections, marked by \if sectionname ... \endif. # documentation sections, marked by \if sectionname ... \endif.
ENABLED_SECTIONS = ENABLED_SECTIONS =
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
# the initial value of a variable or consists of for it to appear in # the initial value of a variable or macro consists of for it to appear in
# the documentation. If the initializer consists of more lines than specifi ed # the documentation. If the initializer consists of more lines than specifi ed
# here it will be hidden. Use a value of 0 to hide initializers completely. # here it will be hidden. Use a value of 0 to hide initializers completely.
# The appearance of the initializer of individual variables and he # The appearance of the initializer of individual variables and macros in t he
# documentation can be controlled using \showinitializer or \hideinitialize r # documentation can be controlled using \showinitializer or \hideinitialize r
# command in the documentation regardless of this setting. # command in the documentation regardless of this setting.
MAX_INITIALIZER_LINES = 30 MAX_INITIALIZER_LINES = 30
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
# at the bottom of the documentation of classes and structs. If set to YES the # at the bottom of the documentation of classes and structs. If set to YES the
# list will mention the files that were used to generate the documentation. # list will mention the files that were used to generate the documentation.
SHOW_USED_FILES = YES SHOW_USED_FILES = YES
skipping to change at line 518 skipping to change at line 595
# The FILE_VERSION_FILTER tag can be used to specify a program or script th at # The FILE_VERSION_FILTER tag can be used to specify a program or script th at
# doxygen should invoke to get the current version for each file (typically from # doxygen should invoke to get the current version for each file (typically from
# the version control system). Doxygen will invoke the program by executing (via # the version control system). Doxygen will invoke the program by executing (via
# popen()) the command <command> <input-file>, where <command> is the value of # popen()) the command <command> <input-file>, where <command> is the value of
# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input fil e # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input fil e
# provided by doxygen. Whatever the program writes to standard output # provided by doxygen. Whatever the program writes to standard output
# is used as the file version. See the manual for examples. # is used as the file version. See the manual for examples.
FILE_VERSION_FILTER = FILE_VERSION_FILTER =
# The LAYOUT_FILE tag can be used to specify a layout file which will be pa # The LAYOUT_FILE tag can be used to specify a layout file which will be pa
rsed rsed
# doxygen. The layout file controls the global structure of the # by doxygen. The layout file controls the global structure of the generate
d
# in an output format independent way. The create the layout # output files in an output format independent way. The create the layout f
ile
# doxygen's defaults, run doxygen with the -l option. You can optionally # that represents doxygen's defaults, run doxygen with the -l option.
a # You can optionally specify a file name after the option, if omitted
file name after the option, if omitted DoxygenLayout.xml will be used as # DoxygenLayout.xml will be used as the name of the layout file.
the name
of the layout file. LAYOUT_FILE = @PROJECT_SOURCE_DIR@/doc/DoxygenLayout.xml
# The CITE_BIB_FILES tag can be used to specify one or more bib files
# containing the references data. This must be a list of .bib files. The
# .bib extension is automatically appended if omitted. Using this command
# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
# feature you need bibtex and perl available in the search path.
= CITE_BIB_FILES =
#-------------------------------------------------------------------------- - #-------------------------------------------------------------------------- -
# configuration options related to warning and progress messages # configuration options related to warning and progress messages
#-------------------------------------------------------------------------- - #-------------------------------------------------------------------------- -
# The QUIET tag can be used to turn on/off the messages that are generated # The QUIET tag can be used to turn on/off the messages that are generated
# by doxygen. Possible values are YES and NO. If left blank NO is used. # by doxygen. Possible values are YES and NO. If left blank NO is used.
QUIET = NO QUIET = NO
skipping to change at line 555 skipping to change at line 642
WARN_IF_UNDOCUMENTED = NO WARN_IF_UNDOCUMENTED = NO
# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
# potential errors in the documentation, such as not documenting some # potential errors in the documentation, such as not documenting some
# parameters in a documented function, or documenting parameters that # parameters in a documented function, or documenting parameters that
# don't exist or using markup commands wrongly. # don't exist or using markup commands wrongly.
WARN_IF_DOC_ERROR = YES WARN_IF_DOC_ERROR = YES
# Thabled to get warnings for # The WARN_NO_PARAMDOC option can be enabled to get warnings for
# functions that are documented, but have no documentation for their parame ters # functions that are documented, but have no documentation for their parame ters
# or return value. If set to NO (the default) doxygen will only warn about # or return value. If set to NO (the default) doxygen will only warn about
# wrong or incomplete parameter documentation, but not about the absence of # wrong or incomplete parameter documentation, but not about the absence of
# documentation. # documentation.
WARN_NO_PARAMDOC = NO WARN_NO_PARAMDOC = NO
# The WARN_FORMAT tag determines the format of the warning messages that # The WARN_FORMAT tag determines the format of the warning messages that
# doxygen can produce. The string should contain the $file,$line, and $tex t # doxygen can produce. The string should contain the$file, $line, and$tex t
# tags, which will be replaced by the file and line number from which the # tags, which will be replaced by the file and line number from which the
skipping to change at line 602 skipping to change at line 689
# also the default input encoding. Doxygen uses libiconv (or the iconv buil t # also the default input encoding. Doxygen uses libiconv (or the iconv buil t
# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
# the list of possible encodings. # the list of possible encodings.
INPUT_ENCODING = UTF-8 INPUT_ENCODING = UTF-8
# If the value of the INPUT tag contains directories, you can use the # If the value of the INPUT tag contains directories, you can use the
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# and *.h) to filter out the source-files in the directories. If left # and *.h) to filter out the source-files in the directories. If left
# blank the following patterns are tested: # blank the following patterns are tested:
# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h # *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.
hh
# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 # *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
# *.f90 *.f *.for *.vhd *.vhdl
FILE_PATTERNS = *.h \ FILE_PATTERNS = *.h \
*.hpp \ *.hpp \
*.doxygen *.doxygen
# The RECURSIVE tag can be used to turn specify whether or not subdirectori es # The RECURSIVE tag can be used to turn specify whether or not subdirectori es
# should be searched for input files as well. Possible values are YES and N O. # should be searched for input files as well. Possible values are YES and N O.
# If left blank NO is used. # If left blank NO is used.
RECURSIVE = YES RECURSIVE = YES
# The EXCLUDE tag can be used to specify files and/or directories that shou ld # The EXCLUDE tag can be used to specify files and/or directories that shou ld be
# excluded from the INPUT source files. This way you can easily exclude a # excluded from the INPUT source files. This way you can easily exclude a
# subdirectory from a directory tree whose root is specified with the INPUT tag. # subdirectory from a directory tree whose root is specified with the INPUT tag.
# Note that relative paths are relative to the directory from which doxygen
is
# run.
EXCLUDE = @PROJECT_SOURCE_DIR@/src/core/external EXCLUDE = @PROJECT_SOURCE_DIR@/src/core/external
# The EXCLUDE_SYMLINKS tag can be used select whether or not files or # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
# directories that are symbolic links (a Unix feature) are # directories that are symbolic links (a Unix file system feature) are excl
uded
# from the input. # from the input.
# If the value of the INPUT tag contains directories, you can use the # If the value of the INPUT tag contains directories, you can use the
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
# certain files from those directories. Note that the wildcards are matched # certain files from those directories. Note that the wildcards are matched
# against the file with absolute path, so to exclude all test directories # against the file with absolute path, so to exclude all test directories
# for example use the pattern */test/* # for example use the pattern */test/*
skipping to change at line 686 skipping to change at line 776
# ignored. # ignored.
INPUT_FILTER = INPUT_FILTER =
# The FILTER_PATTERNS tag can be used to specify filters on a per file patt ern # The FILTER_PATTERNS tag can be used to specify filters on a per file patt ern
# basis. # basis.
# Doxygen will compare the file name with each pattern and apply the # Doxygen will compare the file name with each pattern and apply the
# filter if there is a match. # filter if there is a match.
# The filters are a list of the form: # The filters are a list of the form:
# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
# info on how filters are used. If FILTER_PATTERNS is # info on how filters are used. If FILTER_PATTERNS is empty or if
# is # non of the patterns match the file name, INPUT_FILTER is applied.
FILTER_PATTERNS = FILTER_PATTERNS =
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set us ing # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set us ing
# INPUT_FILTER) will be used to filter the input files when producing sourc e # INPUT_FILTER) will be used to filter the input files when producing sourc e
# files to browse (i.e. when SOURCE_BROWSER is set to YES). # files to browse (i.e. when SOURCE_BROWSER is set to YES).
FILTER_SOURCE_FILES = NO FILTER_SOURCE_FILES = NO
# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per
file
# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
# and it is also possible to disable source filtering for a specific patter
n
# using *.ext= (so without naming a filter). This option only has effect wh
en
# FILTER_SOURCE_FILES is enabled.
FILTER_SOURCE_PATTERNS =
#-------------------------------------------------------------------------- - #-------------------------------------------------------------------------- -
# configuration options related to source browsing # configuration options related to source browsing
#-------------------------------------------------------------------------- - #-------------------------------------------------------------------------- -
# If the SOURCE_BROWSER tag is set to YES then a list of source files will # If the SOURCE_BROWSER tag is set to YES then a list of source files will
# be generated. Documented entities will be cross-referenced with these sou rces. # be generated. Documented entities will be cross-referenced with these sou rces.
# Note: To get rid of all source code in the generated output, make sure al so # Note: To get rid of all source code in the generated output, make sure al so
# VERBATIM_HEADERS is set to NO. # VERBATIM_HEADERS is set to NO.
SOURCE_BROWSER = YES SOURCE_BROWSER = YES
skipping to change at line 767 skipping to change at line 865
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
# of all compounds will be generated. Enable this if the project # of all compounds will be generated. Enable this if the project
# contains a lot of classes, structs, unions or interfaces. # contains a lot of classes, structs, unions or interfaces.
ALPHABETICAL_INDEX = YES ALPHABETICAL_INDEX = YES
# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
# in which this list will be split (can be a number in the range [1..20]) # in which this list will be split (can be a number in the range [1..20])
COLS_IN_ALPHA_INDEX = COLS_IN_ALPHA_INDEX = 3
# In case all classes in a project start with a common prefix, all # In case all classes in a project start with a common prefix, all
# classes will be put under the same header in the alphabetical index. # classes will be put under the same header in the alphabetical index.
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
# should be ignored while generating the index headers. # should be ignored while generating the index headers.
IGNORE_PREFIX = IGNORE_PREFIX =
#-------------------------------------------------------------------------- - #-------------------------------------------------------------------------- -
# configuration options related to the HTML output # configuration options related to the HTML output
skipping to change at line 799 skipping to change at line 897
HTML_OUTPUT = html HTML_OUTPUT = html
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
# each generated HTML page (for example: .htm,.php,.asp). If it is left bla nk # each generated HTML page (for example: .htm,.php,.asp). If it is left bla nk
# doxygen will generate files with .html extension. # doxygen will generate files with .html extension.
HTML_FILE_EXTENSION = .html HTML_FILE_EXTENSION = .html
# The HTML_HEADER tag can be used to specify a personal HTML header for # The HTML_HEADER tag can be used to specify a personal HTML header for
# each generated HTML page. If it is left blank doxygen will generate a # each generated HTML page. If it is left blank doxygen will generate a
# for the proper inclusion of any scripts and style sheets that doxygen
# needs, which is dependent on the configuration options used.
# It is advised to generate a default header using "doxygen -w html
# header.html footer.html stylesheet.css YourConfigFile" and then modify
# that header. Note that the header is subject to change so you typically
# have to redo this when upgrading to a newer version of doxygen or when
# changing the value of configuration settings such as GENERATE_TREEVIEW!
# The HTML_FOOTER tag can be used to specify a personal HTML footer for # The HTML_FOOTER tag can be used to specify a personal HTML footer for
# each generated HTML page. If it is left blank doxygen will generate a # each generated HTML page. If it is left blank doxygen will generate a
# standard footer. # standard footer.
HTML_FOOTER = HTML_FOOTER =
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
# style sheet that is used by each HTML page. It can be used to # style sheet that is used by each HTML page. It can be used to
# fine-tune the look of the HTML output. If the tag is left blank doxygen # fine-tune the look of the HTML output. If the tag is left blank doxygen
# will generate a default style sheet. Note that doxygen will try to copy # will generate a default style sheet. Note that doxygen will try to copy
# the style sheet file to the HTML output directory, so don't put your own # the style sheet file to the HTML output directory, so don't put your own
# stylesheet in the HTML output directory as well, or it will be erased! # style sheet in the HTML output directory as well, or it will be erased!
HTML_STYLESHEET = @PROJECT_SOURCE_DIR@/doc/doxygen.css HTML_STYLESHEET = @PROJECT_SOURCE_DIR@/doc/doxygen.css
# The HTML_EXTRA_FILES tag can be used to specify one or more extra images
or
# other source files which should be copied to the HTML output directory. N
ote
# that these files will be copied to the base HTML output directory. Use th
e
# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load thes
e
# files. In the HTML_STYLESHEET file, use the file name only. Also note tha
t
# the files will be copied as-is; there are no commands or markers availabl
e.
HTML_EXTRA_FILES =
# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
# Doxygen will adjust the colors in the style sheet and background images
# according to this color. Hue is specified as an angle on a colorwheel,
# For instance the value 0 represents red, 60 is yellow, 120 is green,
# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
# The allowed range is 0 to 359.
HTML_COLORSTYLE_HUE = 220
# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
# the colors in the HTML output. For a value of 0 the output will use
# grayscales only. A value of 255 will produce the most vivid colors.
HTML_COLORSTYLE_SAT = 100
# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
# the luminance component of the colors in the HTML output. Values below
# 100 gradually make the output lighter, whereas values above 100 make
# the output darker. The value divided by 100 is the actual gamma applied,
# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
# and 100 does not change the gamma.
HTML_COLORSTYLE_GAMMA = 80
# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
# page will contain the date and time when the page was generated. Setting # page will contain the date and time when the page was generated. Setting
# this to NO can help when comparing the output of multiple runs. # this to NO can help when comparing the output of multiple runs.
HTML_TIMESTAMP = YES HTML_TIMESTAMP = YES
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
# files or namespaces will be aligned in HTML using tables. If set to # files or namespaces will be aligned in HTML using tables. If set to
# NO a bullet list will be used. # NO a bullet list will be used.
skipping to change at line 846 skipping to change at line 985
HTML_DYNAMIC_SECTIONS = NO HTML_DYNAMIC_SECTIONS = NO
# If the GENERATE_DOCSET tag is set to YES, additional index files # If the GENERATE_DOCSET tag is set to YES, additional index files
# will be generated that can be used as input for Apple's Xcode 3 # will be generated that can be used as input for Apple's Xcode 3
# integrated development environment, introduced with OSX 10.5 (Leopard). # integrated development environment, introduced with OSX 10.5 (Leopard).
# To create a documentation set, doxygen will generate a Makefile in the # To create a documentation set, doxygen will generate a Makefile in the
# HTML output directory. Running make will produce the docset in that # HTML output directory. Running make will produce the docset in that
# directory and running "make install" will install the docset in # directory and running "make install" will install the docset in
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
# it at startup. # it at startup.
# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for # See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
GENERATE_DOCSET = NO GENERATE_DOCSET = NO
# When GENERATE_DOCSET tag is set to YES, this tag determines the name of t he # When GENERATE_DOCSET tag is set to YES, this tag determines the name of t he
# feed. A documentation feed provides an umbrella under which multiple # feed. A documentation feed provides an umbrella under which multiple
# documentation sets from a single provider (such as a company or product s uite) # documentation sets from a single provider (such as a company or product s uite)
# can be grouped. # can be grouped.
DOCSET_FEEDNAME = "Stellarium Developers Documentation" DOCSET_FEEDNAME = "Stellarium Developers Documentation"
# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
# should uniquely identify the documentation set bundle. This should be a # should uniquely identify the documentation set bundle. This should be a
# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
# will append .docset to the name. # will append .docset to the name.
DOCSET_BUNDLE_ID = org.stellarium DOCSET_BUNDLE_ID = org.stellarium
# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely id
entify
# the documentation publisher. This should be a reverse domain-name style
# string, e.g. com.mycompany.MyDocSet.documentation.
DOCSET_PUBLISHER_ID = org.doxygen.Publisher
# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
DOCSET_PUBLISHER_NAME = Publisher
# If the GENERATE_HTMLHELP tag is set to YES, additional index files # If the GENERATE_HTMLHELP tag is set to YES, additional index files
# will be generated that can be used as input for tools like the # will be generated that can be used as input for tools like the
# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) # Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
# of the generated HTML documentation. # of the generated HTML documentation.
GENERATE_HTMLHELP = NO GENERATE_HTMLHELP = NO
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
# be used to specify the file name of the resulting .chm file. You # be used to specify the file name of the resulting .chm file. You
# can add a path in front of the file if the result should not be # can add a path in front of the file if the result should not be
skipping to change at line 908 skipping to change at line 1058
BINARY_TOC = NO BINARY_TOC = NO
# The TOC_EXPAND flag can be set to YES to add extra items for group member s # The TOC_EXPAND flag can be set to YES to add extra items for group member s
# to the contents of the HTML help documentation and to the tree view. # to the contents of the HTML help documentation and to the tree view.
TOC_EXPAND = NO TOC_EXPAND = NO
# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
# are set, an additional index file will be generated that can be used as # that can be used as input for Qt's qhelpgenerator to generate a
for # Qt Compressed Help (.qch) of the generated HTML documentation.
Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the
HTML documentation.
GENERATE_QHP = NO GENERATE_QHP = NO
# If the QHG_LOCATION tag is specified, the QCH_FILE tag can # If the QHG_LOCATION tag is specified, the QCH_FILE tag can
# be used to specify the file name of the resulting .qch file. # be used to specify the file name of the resulting .qch file.
# The path specified is relative to the HTML output folder. # The path specified is relative to the HTML output folder.
QCH_FILE = QCH_FILE =
# The QHP_NAMESPACE tag specifies the namespace to use when generating # The QHP_NAMESPACE tag specifies the namespace to use when generating
skipping to change at line 933 skipping to change at line 1083
# http://doc.trolltech.com/qthelpproject.html#namespace # http://doc.trolltech.com/qthelpproject.html#namespace
QHP_NAMESPACE = org.stellarium QHP_NAMESPACE = org.stellarium
# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
# http://doc.trolltech.com/qthelpproject.html#virtual-folders # http://doc.trolltech.com/qthelpproject.html#virtual-folders
QHP_VIRTUAL_FOLDER = doc QHP_VIRTUAL_FOLDER = doc
# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter # If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter
to to
# http://doc.trolltech.com/qthelpproject.html#custom-filters # http://doc.trolltech.com/qthelpproject.html#custom-filters
QHP_CUST_FILTER_NAME = QHP_CUST_FILTER_NAME =
# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the # The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
# <a # <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
Project / Custom Filters</a>. # Qt Help Project / Custom Filters</a>.
QHP_CUST_FILTER_ATTRS = QHP_CUST_FILTER_ATTRS =
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
# project's
# filter section matches. # filter section matches.
# <a # <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
Help Project / Filter Attributes</a>. # Qt Help Project / Filter Attributes</a>.
QHP_SECT_FILTER_ATTRS = QHP_SECT_FILTER_ATTRS =
# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can # If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
# be used to specify the location of Qt's qhelpgenerator. # be used to specify the location of Qt's qhelpgenerator.
# If non-empty doxygen will try to run qhelpgenerator on the generated # If non-empty doxygen will try to run qhelpgenerator on the generated
# .qhp file. # .qhp file.
QHG_LOCATION = QHG_LOCATION =
# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
# will be generated, which together with the HTML files, form an Eclipse h elp # will be generated, which together with the HTML files, form an Eclipse h elp
# nts # plugin. To install this plugin and make it available under the help conte nts
# menu in Eclipse, the contents of the directory containing the HTML and XM L # menu in Eclipse, the contents of the directory containing the HTML and XM L
# files needs to be copied into the plugins directory of eclipse. The name of # files needs to be copied into the plugins directory of eclipse. The name of
# the directory within the plugins directory should be the same as # the directory within the plugins directory should be the same as
# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted bef # the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted bef
ore the help appears. ore
# the help appears.
GENERATE_ECLIPSEHELP = NO GENERATE_ECLIPSEHELP = NO
# A unique identifier for the eclipse help plugin. When installing the plug in # A unique identifier for the eclipse help plugin. When installing the plug in
# the directory name containing the HTML and XML files should also have # the directory name containing the HTML and XML files should also have
# this name. # this name.
ECLIPSE_DOC_ID = org.doxygen.Project ECLIPSE_DOC_ID = org.doxygen.Project
# The DISABLE_INDEX tag can be used to turn on/off the condensed index # The DISABLE_INDEX tag can be used to turn on/off the condensed index (tab
# top of each HTML page. The value NO (the default) enables the index s)
# the value YES disables it. # at top of each HTML page. The value NO (the default) enables the index an
d
# the value YES disables it. Since the tabs have the same information as th
e
# navigation tree you can set this option to NO if you already set
# GENERATE_TREEVIEW to YES.
DISABLE_INDEX = NO
=
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
# structure should be generated to display hierarchical information. # structure should be generated to display hierarchical information.
# If the tag value is set to YES, a side panel will be generated # If the tag value is set to YES, a side panel will be generated
# containing a tree-like index structure (just like the one that # containing a tree-like index structure (just like the one that
# is generated for HTML Help). For this to work a browser that supports # is generated for HTML Help). For this to work a browser that supports
# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
# Windows users are probably better off using the HTML help feature. # Windows users are probably better off using the HTML help feature.
# Since the tree basically has the same information as the tab index you
# could consider to set DISABLE_INDEX to NO when enabling this option.
GENERATE_TREEVIEW = NO GENERATE_TREEVIEW = NO
# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
# (range [0,1..20]) that doxygen will group on one line in the generated HT
ML
# documentation. Note that a value of 0 will completely suppress the enum
# values from appearing in the overview section.
ENUM_VALUES_PER_LINE = 4
# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directori es, # By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directori es,
# and Class Hierarchy pages using a tree view instead of an ordered list. # and Class Hierarchy pages using a tree view instead of an ordered list.
USE_INLINE_TREES = NO USE_INLINE_TREES = NO
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
# used to set the initial width (in pixels) of the frame in which the tree # used to set the initial width (in pixels) of the frame in which the tree
# is shown. # is shown.
TREEVIEW_WIDTH = 250 TREEVIEW_WIDTH = 250
# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
# links to external symbols imported via tag files in a separate window.
# Use this tag to change the font size of Latex formulas included # Use this tag to change the font size of Latex formulas included
# as images in the HTML documentation. The default is 10. Note that # as images in the HTML documentation. The default is 10. Note that
# when you change the font size after a successful doxygen run you need # when you change the font size after a successful doxygen run you need
# to manually remove any form_*.png images from the HTML output directory # to manually remove any form_*.png images from the HTML output directory
# to force them to be regenerated. # to force them to be regenerated.
FORMULA_FONTSIZE = 10 FORMULA_FONTSIZE = 10
# When the SEARCHENGINE tag is enabled doxygen will generate a search box # Use the FORMULA_TRANPARENT tag to determine whether or not the images
the HTML output. The underlying search engine uses javascript # generated for formulas are transparent PNGs. Transparent PNGs are
# and DHTML and should work on any modern browser. Note that when using # not supported properly for IE 6.0, but are supported on all modern browse
help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets rs.
there is already a search function so this one should # Note that when changing this option you need to delete any form_*.png fil
es
# in the HTML output before the changes have effect.
FORMULA_TRANSPARENT = YES
# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
# (see http://www.mathjax.org) which uses client side Javascript for the
# rendering instead of using prerendered bitmaps. Use this if you do not
# have LaTeX installed or if you want to formulas look prettier in the HTML
# output. When enabled you may also need to install MathJax separately and
# configure the path to it using the MATHJAX_RELPATH option.
USE_MATHJAX = NO
# When MathJax is enabled you need to specify the location relative to the
# HTML output directory using the MATHJAX_RELPATH option. The destination
# directory should contain the MathJax.js script. For instance, if the math
jax
# directory is located at the same level as the HTML output directory, then
# MATHJAX_RELPATH should be ../mathjax. The default value points to
# the MathJax Content Delivery Network so you can quickly see the result wi
thout
# installing MathJax.
# However, it is strongly recommended to install a local
# copy of MathJax from http://www.mathjax.org before deployment.
MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extensio
n
# names that should be enabled during MathJax rendering.
MATHJAX_EXTENSIONS =
# When the SEARCHENGINE tag is enabled doxygen will generate a search box
# for the HTML output. The underlying search engine uses javascript
# and DHTML and should work on any modern browser. Note that when using
# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
# (GENERATE_DOCSET) there is already a search function so this one should
# typically be disabled. For large projects the javascript based search eng ine # typically be disabled. For large projects the javascript based search eng ine
# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solut ion. # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solut ion.
SEARCHENGINE = NO SEARCHENGINE = NO
# When the SERVER_BASED_SEARCH tag is enabled the search engine will be # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
using a PHP enabled web server instead of at the web client using # implemented using a PHP enabled web server instead of at the web client
Javascript. Doxygen will generate the search PHP script and index # using Javascript. Doxygen will generate the search PHP script and index
# file to put on the web server. The advantage of the server based approach # file to put on the web server. The advantage of the server
is that it scales better to large projects and allows full text search. # based approach is that it scales better to large projects and allows
that it is more difficult to # full text search. The disadvantages are that it is more difficult to setu
p
# and does not have live searching capabilities. # and does not have live searching capabilities.
SERVER_BASED_SEARCH = NO SERVER_BASED_SEARCH = NO
#-------------------------------------------------------------------------- - #-------------------------------------------------------------------------- -
# configuration options related to the LaTeX output # configuration options related to the LaTeX output
#-------------------------------------------------------------------------- - #-------------------------------------------------------------------------- -
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
# generate Latex output. # generate Latex output.
skipping to change at line 1062 skipping to change at line 1269
MAKEINDEX_CMD_NAME = makeindex MAKEINDEX_CMD_NAME = makeindex
# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
# LaTeX documents. This may be useful for small projects and may help to # LaTeX documents. This may be useful for small projects and may help to
# save some trees in general. # save some trees in general.
COMPACT_LATEX = NO COMPACT_LATEX = NO
# The PAPER_TYPE tag can be used to set the paper type that is used # The PAPER_TYPE tag can be used to set the paper type that is used
# by the printer. Possible values are: a4, letter, legal and # by the printer. Possible values are: a4, letter, legal and
# executive. If left blank a4wide will be used. # executive. If left blank a4wide will be used.
PAPER_TYPE = a4wide PAPER_TYPE = a4wide
# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
# packages that should be included in the LaTeX output. # packages that should be included in the LaTeX output.
EXTRA_PACKAGES = EXTRA_PACKAGES =
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
# the generated latex document. The header should contain everything until # the generated latex document. The header should contain everything until
# the first chapter. If it is left blank doxygen will generate a # the first chapter. If it is left blank doxygen will generate a
# standard header. Notice: only use this tag if you know what you are doing ! # standard header. Notice: only use this tag if you know what you are doing !
# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
# the generated latex document. The footer should contain everything after
# the last chapter. If it is left blank doxygen will generate a
# standard footer. Notice: only use this tag if you know what you are doing
!
LATEX_FOOTER =
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
# is prepared for conversion to pdf (using ps2pdf). The pdf file will # is prepared for conversion to pdf (using ps2pdf). The pdf file will
# contain links (just like the HTML output) instead of page references # contain links (just like the HTML output) instead of page references
# This makes the output suitable for online browsing using a pdf viewer. # This makes the output suitable for online browsing using a pdf viewer.
# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
# plain latex in the generated Makefile. Set this option to YES to get a # plain latex in the generated Makefile. Set this option to YES to get a
# higher quality PDF documentation. # higher quality PDF documentation.
skipping to change at line 1105 skipping to change at line 1319
# This option is also used when generating formulas in HTML. # This option is also used when generating formulas in HTML.
LATEX_BATCHMODE = NO LATEX_BATCHMODE = NO
# If LATEX_HIDE_INDICES is set to YES then doxygen will not # If LATEX_HIDE_INDICES is set to YES then doxygen will not
# include the index chapters (such as File Index, Compound Index, etc.) # include the index chapters (such as File Index, Compound Index, etc.)
# in the output. # in the output.
LATEX_HIDE_INDICES = NO LATEX_HIDE_INDICES = NO
# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code # If LATEX_SOURCE_CODE is set to YES then doxygen will include
with syntax highlighting in the LaTeX output. Note that which sources are # source code with syntax highlighting in the LaTeX output.
also depends on other settings such as SOURCE_BROWSER. # Note that which sources are shown also depends on other settings
# such as SOURCE_BROWSER.
LATEX_SOURCE_CODE = NO LATEX_SOURCE_CODE = NO
# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
LATEX_BIB_STYLE = plain
#-------------------------------------------------------------------------- - #-------------------------------------------------------------------------- -
# configuration options related to the RTF output # configuration options related to the RTF output
#-------------------------------------------------------------------------- - #-------------------------------------------------------------------------- -
# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
# The RTF output is optimized for Word 97 and may not look very pretty with # The RTF output is optimized for Word 97 and may not look very pretty with
# other RTF readers or editors. # other RTF readers or editors.
GENERATE_RTF = NO GENERATE_RTF = NO
skipping to change at line 1140 skipping to change at line 1363
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
# will contain hyperlink fields. The RTF file will # will contain hyperlink fields. The RTF file will
# contain links (just like the HTML output) instead of page references. # contain links (just like the HTML output) instead of page references.
# This makes the output suitable for online browsing using WORD or other # This makes the output suitable for online browsing using WORD or other
# programs which support those fields. # programs which support those fields.
# Load stylesheet definitions from file. Syntax is similar to doxygen's # Load style sheet definitions from file. Syntax is similar to doxygen's
# config file, i.e. a series of assignments. You only have to provide # config file, i.e. a series of assignments. You only have to provide
# replacements, missing definitions are set to their default value. # replacements, missing definitions are set to their default value.
RTF_STYLESHEET_FILE = RTF_STYLESHEET_FILE =
# Set optional variables used in the generation of an rtf document. # Set optional variables used in the generation of an rtf document.
# Syntax is similar to doxygen's config file. # Syntax is similar to doxygen's config file.
RTF_EXTENSIONS_FILE = RTF_EXTENSIONS_FILE =
skipping to change at line 1285 skipping to change at line 1508
MACRO_EXPANSION = NO MACRO_EXPANSION = NO
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
# then the macro expansion is limited to the macros specified with the # then the macro expansion is limited to the macros specified with the
# PREDEFINED and EXPAND_AS_DEFINED tags. # PREDEFINED and EXPAND_AS_DEFINED tags.
EXPAND_ONLY_PREDEF = NO EXPAND_ONLY_PREDEF = NO
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
# a #include is found. # pointed to by INCLUDE_PATH will be searched when a #include is found.
SEARCH_INCLUDES = YES SEARCH_INCLUDES = YES
# The INCLUDE_PATH tag can be used to specify one or more directories that # The INCLUDE_PATH tag can be used to specify one or more directories that
# contain include files that are not input files but should be processed by # contain include files that are not input files but should be processed by
# the preprocessor. # the preprocessor.
INCLUDE_PATH = INCLUDE_PATH =
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
skipping to change at line 1315 skipping to change at line 1538
# or name=definition (no spaces). If the definition and the = are # or name=definition (no spaces). If the definition and the = are
# omitted =1 is assumed. To prevent a macro definition from being # omitted =1 is assumed. To prevent a macro definition from being
# undefined via #undef or recursively expanded use the := operator # undefined via #undef or recursively expanded use the := operator
# instead of the = operator. # instead of the = operator.
PREDEFINED = PREDEFINED =
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
# this tag can be used to specify a list of macro names that should be expa nded. # this tag can be used to specify a list of macro names that should be expa nded.
# The macro definition that is found in the sources will be used. # The macro definition that is found in the sources will be used.
# Use the PREDEFINED tag if you want to use a different macro # Use the PREDEFINED tag if you want to use a different macro definition th
at
# overrules the definition found in the source code.
EXPAND_AS_DEFINED = EXPAND_AS_DEFINED =
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
# doxygen's preprocessor will remove all function-like macros that are # doxygen's preprocessor will remove all references to function-like macros
# that are alone on a line, have an all uppercase name, and do not end with
on a line, have an all uppercase name, and do not end with a a
# semicolon, because these will confuse the parser if not removed.
# will
the parser if not removed.
SKIP_FUNCTION_MACROS = NO SKIP_FUNCTION_MACROS = NO
#-------------------------------------------------------------------------- - #-------------------------------------------------------------------------- -
# Configuration::additions related to external references # Configuration::additions related to external references
#-------------------------------------------------------------------------- - #-------------------------------------------------------------------------- -
# The TAGFILES option can be used to specify one or more tagfiles. # The TAGFILES option can be used to specify one or more tagfiles. For each
# location of the external documentation # tag file the location of the external documentation should be added. The
be The format of a tag file without # format of a tag file without this location is as follows:
this location is as follows:
# #
# TAGFILES = file1 file2 ... # TAGFILES = file1 file2 ...
# Adding location for the tag files is done as follows: # Adding location for the tag files is done as follows:
# #
# TAGFILES = file1=loc1 "file2 = loc2" ... # TAGFILES = file1=loc1 "file2 = loc2" ...
# where "loc1" and "loc2" can be relative or absolute paths # where "loc1" and "loc2" can be relative or absolute paths
# URLs. # or URLs. Note that each tag file must have a unique name (where the name
does
Note that each tag file must have a unique name # NOT include the path). If a tag file is not located in the directory in w
(where the name does NOT include the hich
If a tag file is not located in the directory in # doxygen is run, you must also specify the path to the tagfile here.
# is run, you must also specify the path to the tagfile here.
TAGFILES = "../../doc/qt.tag=http://doc.qt.nokia.com/stable/" TAGFILES = "../../doc/qt.tag=http://doc.qt.nokia.com/stable/"
# BM: A tag file for Qt can be found in KDE's API documentation tarbal: # BM: A tag file for Qt can be found in KDE's API documentation tarbal:
# http://api.kde.org/kdereview-api/kdereview.tar.gz # http://api.kde.org/kdereview-api/kdereview.tar.gz
# When a file name is specified after GENERATE_TAGFILE, doxygen will create # When a file name is specified after GENERATE_TAGFILE, doxygen will create
# a tag file that is based on the input files it reads. # a tag file that is based on the input files it reads.
GENERATE_TAGFILE = Stellarium.tag GENERATE_TAGFILE = Stellarium.tag
skipping to change at line 1381 skipping to change at line 1600
PERL_PATH = /usr/bin/perl PERL_PATH = /usr/bin/perl
#-------------------------------------------------------------------------- - #-------------------------------------------------------------------------- -
# Configuration options related to the dot tool # Configuration options related to the dot tool
#-------------------------------------------------------------------------- - #-------------------------------------------------------------------------- -
# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
# or super classes. Setting the tag to NO turns the diagrams off. Note that # or super classes. Setting the tag to NO turns the diagrams off. Note that
# this option HAVE_DOT # this option also works with HAVE_DOT disabled, but it is recommended to
is recommended to install and use dot, since it yields more # install and use dot, since it yields more powerful graphs.
powerful graphs.
CLASS_DIAGRAMS = NO CLASS_DIAGRAMS = NO
# You can define message sequence charts within doxygen comments using the \msc # You can define message sequence charts within doxygen comments using the \msc
# command. Doxygen will then run the mscgen tool (see # command. Doxygen will then run the mscgen tool (see
# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
# documentation. The MSCGEN_PATH tag allows you to specify the directory wh ere # documentation. The MSCGEN_PATH tag allows you to specify the directory wh ere
# the mscgen tool resides. If left empty the tool is assumed to be found in the # the mscgen tool resides. If left empty the tool is assumed to be found in the
# default search path. # default search path.
skipping to change at line 1409 skipping to change at line 1627
HIDE_UNDOC_RELATIONS = YES HIDE_UNDOC_RELATIONS = YES
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
# available from the path. This tool is part of Graphviz, a graph visualiza tion # available from the path. This tool is part of Graphviz, a graph visualiza tion
# toolkit from AT&T and Lucent Bell Labs. The other options in this section # toolkit from AT&T and Lucent Bell Labs. The other options in this section
# have no effect if this option is set to NO (the default) # have no effect if this option is set to NO (the default)
HAVE_DOT = NO HAVE_DOT = NO
# doxygen will a to the # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
# and all dot files that doxygen generates. # allowed to run in parallel. When set to 0 (the default) doxygen will
# base this on the number of processors available in the system. You can se
t it
want a differently looking you can the font # explicitly to a value larger than 0 to get control over the balance
name # between CPU load and processing speed.
using DOT_FONTNAME. You need to make sure dot is able to
# which can be done by putting it in a standard location or by
# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the # By default doxygen will use the Helvetica font for all dot files that
# doxygen generates. When you want a differently looking font you can speci
# containing the font. fy
# the font name using DOT_FONTNAME. You need to make sure dot is able to fi
nd
# the font, which can be done by putting it in a standard location or by se
tting
# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
# directory containing the font.
DOT_FONTNAME = FreeSans DOT_FONTNAME = FreeSans
# The DOT_FONTSIZE tag can be used to set the size of the font of dot graph s. # The DOT_FONTSIZE tag can be used to set the size of the font of dot graph s.
# The default size is 10pt. # The default size is 10pt.
DOT_FONTSIZE = 10 DOT_FONTSIZE = 10
# By default doxygen will tell dot to use the # By default doxygen will tell dot to use the Helvetica font.
# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPA
# If you specify a TH to
different font using DOT_FONTNAME you can set the path where dot # set the path where dot can find it.
can find
DOT_FONTPATH = DOT_FONTPATH =
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
# will generate a graph for each documented class showing the direct and # will generate a graph for each documented class showing the direct and
# indirect inheritance relations. Setting this tag to YES will force the # indirect inheritance relations. Setting this tag to YES will force the
# CLASS_DIAGRAMS tag to NO. # CLASS_DIAGRAMS tag to NO.
CLASS_GRAPH = NO CLASS_GRAPH = NO
# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
# will generate a graph for each documented class showing the direct and # will generate a graph for each documented class showing the direct and
# indirect implementation dependencies (inheritance, containment, and # indirect implementation dependencies (inheritance, containment, and
# class references variables) of the class with other documented classes. # class references variables) of the class with other documented classes.
COLLABORATION_GRAPH = NO COLLABORATION_GRAPH = NO
skipping to change at line 1457 skipping to change at line 1680
# will generate a graph for groups, showing the direct groups dependencies # will generate a graph for groups, showing the direct groups dependencies
GROUP_GRAPHS = YES GROUP_GRAPHS = YES
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
# collaboration diagrams in a style similar to the OMG's Unified Modeling # collaboration diagrams in a style similar to the OMG's Unified Modeling
# Language. # Language.
UML_LOOK = NO UML_LOOK = NO
# If the UML_LOOK tag is enabled, the fields and methods are shown inside
# the class node. If there are many fields or methods and many nodes the
# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
# threshold limits the number of items for each type to make the size more
# managable. Set this to 0 for no limit. Note that the threshold may be
# exceeded by 50% before the limit is enforced.
UML_LIMIT_NUM_FIELDS = 10
# If set to YES, the inheritance and collaboration graphs will show the # If set to YES, the inheritance and collaboration graphs will show the
# relations between templates and their instances. # relations between templates and their instances.
TEMPLATE_RELATIONS = NO TEMPLATE_RELATIONS = NO
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
# tags are set to YES then doxygen will generate a graph for each documente d # tags are set to YES then doxygen will generate a graph for each documente d
# file showing the direct and indirect include dependencies of the file wit h # file showing the direct and indirect include dependencies of the file wit h
# other documented files. # other documented files.
skipping to change at line 1493 skipping to change at line 1725
# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
# doxygen will generate a caller dependency graph for every global function # doxygen will generate a caller dependency graph for every global function
# or class method. Note that enabling this option will significantly increa se # or class method. Note that enabling this option will significantly increa se
# the time of a run. So in most cases it will be better to enable caller # the time of a run. So in most cases it will be better to enable caller
# graphs for selected functions only using the \callergraph command. # graphs for selected functions only using the \callergraph command.
CALLER_GRAPH = NO CALLER_GRAPH = NO
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
# will gne. # will generate a graphical hierarchy of all classes instead of a textual o ne.
GRAPHICAL_HIERARCHY = YES GRAPHICAL_HIERARCHY = YES
# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
# then doxygen will show the dependencies a directory has on other director ies # then doxygen will show the dependencies a directory has on other director ies
# in a graphical way. The dependency relations are determined by the #inclu de # in a graphical way. The dependency relations are determined by the #inclu de
# relations between the files in the directories. # relations between the files in the directories.
DIRECTORY_GRAPH = YES DIRECTORY_GRAPH = YES
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the image s # The DOT_IMAGE_FORMAT tag can be used to set the image format of the image s
# generated by dot. Possible values are png, jpg, or # generated by dot. Possible values are svg, png, jpg, or gif.
# If left blank png will be used. # If left blank png will be used. If you choose svg you need to set
# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
# visible in IE 9+ (other browsers do not have this requirement).
DOT_IMAGE_FORMAT = png DOT_IMAGE_FORMAT = png
# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
# enable generation of interactive SVG images that allow zooming and pannin
g.
# Note that this requires a modern browser other than Internet Explorer.
# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
# visible. Older versions of IE do not have SVG support.
INTERACTIVE_SVG = NO
# The tag DOT_PATH can be used to specify the path where the dot tool can b e # The tag DOT_PATH can be used to specify the path where the dot tool can b e
# found. If left blank, it is assumed the dot tool can be found in the path . # found. If left blank, it is assumed the dot tool can be found in the path .
DOT_PATH = DOT_PATH =
# The DOTFILE_DIRS tag can be used to specify one or more directories that # The DOTFILE_DIRS tag can be used to specify one or more directories that
# contain dot files that are included in the documentation (see the # contain dot files that are included in the documentation (see the
# \dotfile command). # \dotfile command).
DOTFILE_DIRS = DOTFILE_DIRS =
# The MSCFILE_DIRS tag can be used to specify one or more directories that
# contain msc files that are included in the documentation (see the
# \mscfile command).
MSCFILE_DIRS =
# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
# nodes that will be shown in the graph. If the number of nodes in a graph # nodes that will be shown in the graph. If the number of nodes in a graph
# becomes larger than this value, doxygen will truncate the graph, which is # becomes larger than this value, doxygen will truncate the graph, which is
# visualized by representing a node as a red box. Note that doxygen if the # visualized by representing a node as a red box. Note that doxygen if the
# number of direct children of the root node in a graph is already larger t han # number of direct children of the root node in a graph is already larger t han
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH . # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH .
DOT_GRAPH_MAX_NODES = 50 DOT_GRAPH_MAX_NODES = 50
End of changes. 72 change blocks.
154 lines changed or deleted 424 lines changed or added

This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/